Budapest, XIII. Ker. Lehel u. 54. (Kartács u. sarok) Tel.: 06-20 988 13 13

Belépés / Regisztráció
Kosár   [0]
Hengerűrtartalom (ccm)

1 2 3 ... 178 179 180  


You can trust the expertise of the international OEM. Louis sells the original kit (comprising chain + front/rear sprockets) from the Japanese manufacturer Daido Corp. and its authorised German importer. Never settle for second best.

  • D.I.D chains in these original kits always conform to the specifications of the vehicle manufacturers and/or Daido Corp. Click on "Catalogue page in PDF format" below to find out whether a particular chain kit contains an endless chain or an open chain with rivet-type or clip connecting link.

  • The catalogue page includes a column "S", which contains the following codes: E = endless chain, N = open chain with rivet-type connecting link and C = open chain with clip connecting link.
As a general rule, we recommend that, for your own safety, endless chains should not be modified prior to fitting. If, however, this would involve dismantling the swing arm and you, or the workshop, wish to avoid this operation, you can also order a suitable connecting link from us. You will find a range of links if you enter the search term "Connecting link" or check in the latest Louis catalogue. You should take into account any information from the chain manufacturer concerning the warranty. This information can be found in the installation instructions for the chain set.

  • Less greasing and less tightening required. In the medium-term, an O-ring or X-ring chain is always more economical than a standard chain
  • As modern motorcycles continue to develop, drive components have to cope with ever-increasing demands. New, more powerful machines and the requirement for materials to have a longer service life demand a new solution - and it is provided by D.I.D. in the form of X-ring chains. The specially shaped sealing rings significantly alter the friction area of the links. At the same time, doubling the number of sealing points from 2 to 4 has the effect of safeguarding far more effectively against lubricant loss and also provides optimum protection against dirt.
  • All this results in an extremely long service life. This chain can effortlessly withstand major stresses and strains, and also offers noticeably improved operational characteristics.
  • All X-ring chains (with the exception of VX chains) feature gold-plated outer links.

Never attempt to install a motorcycle chain unless you have at least basic technical expertise.

57 730 Ft » 33 250 Ft (26 181 Ft + ÁFA)  


Bodystyle Lower Fairing
Painted or unpainted

The Bodystyle Lower Fairing really brings out the race styling in your motorcycle, while at the same time giving more protection for engine and transmission. It also has the advantage of being relatively quick and easy to install.

  • Made of impact-resistant ABS plastic
  • No drilling or sawing necessary
  • Completely ready to install with all the fittings
  • Available in motorcycle colours or unpainted!
  • Type approved
80 500 Ft (63 386 Ft + ÁFA)  


Bodystyle Seat Cowl
Painted and unpainted

The Seat Cowl from Bodystyle is a great way to make your motorcycle that much sportier. Whether painted or unpainted, you're sure to love the look.

In no time at all, the original two-person seat is converted into a sporty single-seater.

  • The cowl is mounted on top of or in place of the original pillion seat. A back cushion is not included
  • Made of ABS plastic
  • Supplied in the exact original colours or unpainted
  • Completely ready to install and with type approval valid for Germany

You can find installation examples in our Documents section.

15 750 Ft (12 402 Ft + ÁFA)  


Kisméretű, klasszikus formájú, krómozott chopper/cruiser index.

  • magas minőségű, krómozott acél ház
  • ház átmérő: 37 mm
  • mélység: 68 mm
  • lencse átmérő: 27 mm
  • szárhossz: 20 mm
  • rögzítő menet: M10 x 1.25, 25 mm hosszú
  • a testelést a ház adja
  • 2/21 W halogén izzóval
  • E minősített
  • 1db
7 000 Ft (5 512 Ft + ÁFA)  


Handlebar Grips "Cruiser"

"Cruiser" Handlebar Grips:

These high-quality chromed grips look awesome on almost any bike.. The end caps can be unscrewed and removed to enable bar ends, bar-end turn signals or vibration killers to be installed easily. The rubber inserts ensure the best possible grip at all times, even when riding in rain. Sold in pairs. Available for metric (22 mm diameter) and imperial handlebars.

  • Overall length: approx. 150 mm
  • Material: Aluminium
  • Grip end: removable threaded end cap
  • Outside diameter: approx. 42 mm
  • Grip circumference: approx. 136 mm
  • For inch or metric handlebars

These grips are suitable for universal fitting to a variety of handlebars. In rare cases there may be compatibility problems due to differing handlebar diameters, depending on the particular manufacturer. It may also be necessary to customise the original throttle grip sleeve. On some models a small amount of metal has to be filed away. The grips should fit tightly, but should push on without too much effort. It is very important to check the fit before installing them. Never force them on!

14 000 Ft (11 024 Ft + ÁFA)  



Szinte minden chopperre, vagy cruiserre felszerelhető univerzális alkatrész

  • krómozott acél
  • gumírozott felülete biztonságosan alátámasztja a csizmát
  • méretek: 90 x 180 x 12 mm.
  • 1 pár
24 500 Ft (19 291 Ft + ÁFA)  


Rubber Grips "Stripe"
Black, Pair

"Stripe" Rubber Grips:

  • Made from specially-developed high-quality rubber material.
  • Super-grippy and soft.
  • Compatible with metric (22 mm) handlebars.
  • Overall length: 12 cm.
  • Outside diameter: approx. 30 mm
  • Grip circumference: approx. 94 mm
  • Colour: black.
  • Sold in pairs.

Grooves are provided at either end of the gripping area for safety wiring, as is usual for motorcycle racing.

3 500 Ft (2 756 Ft + ÁFA)  

*LED MICRO 1000* 7.5 OHM

Kellermann Resistor

Kellermann 7.5 Ohm resistor

The resistor for the Kellermann micro 1000 LED turn signal! Simulates a power consumption of 19.2 W.

Sold individually

2 080 Ft (1 638 Ft + ÁFA)  

*MICRO 1000* 10 OHM

Kellermann Resistor


For installing KELLERMANN "micro 1000" turn signals.

Sold individually

1 730 Ft (1 362 Ft + ÁFA)  


Ball Head Adapter
For Kellermann Micro 1000


Simply mount the ball head adaptor instead of the standard M8x20 fastening.

  • For mounting the "micro 1000" turn signals on inclined surfaces.
  • CNC-machined.
  • Available in chrome, satin chrome and black.
  • Sold individually
3 480 Ft (2 740 Ft + ÁFA)  


Fastening Thread M8x40
For Kellermann Micro 1000


Installed in place of the M8x20 fastening thread.

  • CNC-machined
  • Available in chrome, satin chrome and black
  • Sold individually
1 730 Ft (1 362 Ft + ÁFA)  


Kellermann LED Turn Signal

Kellermann "micro 1000 white" LED turn signal

  • E-approved as front and rear turn signal
  • The latest LED technology in the design and size of the micro 1000
  • Clear lens!
  • Extremely long life (approx. 50,000 h) thanks to MOSFET-controlled internal Long Life Protection Guard circuit
  • The optimum radiation characteristics of the high-performance lens and the fast reaction of the LEDs make for greater safety!
  • Can be used on any motorcycle!
  • In some cases, resistors or a load-independent relay may be needed to reduce the flashing frequency
  • Available in chrome, satin chrome and black
  • 4 W LED
  • Includes silent rubber fastening M8x20
  • Sold individually
20 980 Ft » 17 480 Ft (13 764 Ft + ÁFA)  



Puig Belly Pan

  • Individual, sporty look
  • Made of highly resistant ABS
  • High quality matt-black surface
  • Decal kit in various colours (application optional)
  • Fitting kit included
  • No drilling or cutting necessary
  • Fixation within minutes
  • Approved by the german TÜV
56 000 Ft (44 094 Ft + ÁFA)  


Louis Footrest Sundance
Universal with clamp

"Sundance" footrests:

  • These elegant footrests are mounted by means of clamps (diameter: 22 to 26 mm) on the crash bar or similar location.
  • They can be folded up, and have an overall length of 130 mm (diameter: 30 mm).
  • Sold in pairs.
  • Available in black or chrome

Note: This item is not approved for road use under the German Road Traffic Licensing Regulations (StVZO). Individual TÜV test centre approval required.

14 000 Ft (11 024 Ft + ÁFA)  


Resistor With Cables

Resistor with cables

Simply connect the ready-wired resistor with the crimp connectors, and the flashing frequency will be correct again!

  • 10 ohms (corresponds to approx. 14.4 W)
  • For converting from conventional 21 W turn signals to LED turn signals with, for example, only 6 W
  • Incorrect connection is not possible!
  • Simple, parallel resistor installation
  • Suitable for almost any motorcycle model
2 800 Ft (2 205 Ft + ÁFA)  

1 2 3 ... 178 179 180