Budapest, XIII. Ker. Lehel u. 54. (Kartács u. sarok) Tel.: 06-20 988 13 13

 
Keresés
 
Motorom
Belépés / Regisztráció
Kosár   [0]
Gyártó
Felépítés
Hengerűrtartalom (ccm)
Motortípus
 


  1 2 3 4 5 6 ... 178 179 180  

ADAPTER SET FOR ECON

Econ Scissor Lift Jack Adapter Set

The adapter kit for the Econ 300 Scissor Lift Jack comprises seven parts. They are each made of high-grade galvanized and/or coated steel.

The range of applications comprises:
Two 55 mm or two 105 mm long Y-attachments can be movably fitted lengthways, allowing the Econ Scissor Lift Jack to be positioned under the lower frame tubes of motorcycles whose exhaust or oil sump projects beyond the frame.
A wheel platform allows the rear wheel of a motorcycle that is standing on a hoist to be raised and lowered with millimetre accuracy for fitting/removing. So the push-fit axle can be inserted without having to hold the heavy bike by hand.

Set consists of:

  • 2 support adapters
  • 2 Y-adapters, short
  • 2 Y-adapters, long
  • 1 wheel adapter plate
17 500 Ft (13 780 Ft + ÁFA)  

ADAPTER SET FOR ROTHEWALD

Rothewald Adaptor Set For
Scissor Lift Jack, 8-Piece

Rothewald Spare Adapter Set for motorcycle scissor lift jack, 8-piece

Six rubber-lined adapters for supporting motorbikes with tubular frame (e.g. if there are projecting engine parts) on the Rothewald scissor lift jack (Order no. 10003265) and two mounting brackets for the adapters.

  • Adapter heights approx. 7 cm, 9.5 cm and 11 cm.
  • All the adapters have a sturdy, rubber-lined support surface
5 250 Ft (4 134 Ft + ÁFA)  

ADAPTER SET, 6-PIECE

Adapter Set, 6-Piece
For Petrol Canister Set

These six connectors are compatible with the Fuel Canister Set, Order no. 10035089. They come in various sizes for a range of different uses, so you always have the right adapter for any job.

2 450 Ft (1 929 Ft + ÁFA)  

ADAPTIVE LED HEADLIGHT

Adaptive LED-Headlight
8790 7'' JW Speaker

Seeing and being seen can be a matter of life or death for motorcycle riders. Enormous progress has been made in this area thanks to modern LED light technology. The adaptive headlight from JW Speaker takes vehicle lighting to the next level. This LED headlight gives your motorcycle a highly effective cornering light, so you have a better view into bends. And it's easy to fit in place of you normal headlight!

The adaptive headlight from JW Speaker is equipped with special position sensors, which measure your bike's lean angle in corners and switch on additional LEDs to illuminate the inside of the bend. That means better illumination of both left and right curves, in contrast with conventional headlights. ECE-approved.

Details: JW Speaker Model 8790

  • Round headlight
  • Fits in many 7-inch (PAR56) headlight housings
  • Powerful low beam with 850 eff. lm / 11,500 cd
  • High beam with ComfortLite 1,150 eff. lm / 48,000 cd
  • ECE-approved (Reg. 50, 113)
  • Housing made of heavy-duty, corrosion-resistant aluminium

Also available with 5 3/4" headlight - see "Compatible products".

Please note that the LED headlight unit becomes hotter than an H4 headlight unit. Adequate ventilation must be ensured. Do not place cables inside the headlight housing.

300 650 Ft (236 732 Ft + ÁFA)  

ADAPTIVE LED HEADLIGHT

Adaptive LED-Headlight
8690 5 3/4'' JW SPEAKER

Seeing and being seen can be a matter of life or death for motorcycle riders. Enormous progress has been made in this area thanks to modern LED light technology. The adaptive headlight from JW Speaker takes vehicle lighting to the next level. This LED headlight gives your motorcycle a highly effective cornering light, so you have a better view into bends. And it's easy to fit in place of you normal headlight!

The adaptive headlight from JW Speaker is equipped with special position sensors, which measure your bike's lean angle in corners and switch on additional LEDs to illuminate the inside of the bend. That means better illumination of both left and right curves, in contrast with conventional headlights. ECE-approved.

Details: JW Speaker Model 8690

  • Round headlight
  • Fits in many 5 3/4 inch headlight housings
  • Powerful low beam with 1.020 eff. lm / 8,300 cd
  • High beam with ComfortLite 1,600 eff. lm / 60,000 cd
  • ECE-approved (Reg. 113)
  • Housing made of heavy-duty, corrosion-resistant aluminium

Also available with 7" headlight - see "Compatible products".

Please note that the LED headlight unit becomes hotter than an H4 headlight unit. Adequate ventilation must be ensured. Do not place cables inside the headlight housing.

209 650 Ft (165 079 Ft + ÁFA)  

ADAPTOR CABLE

Adaptor Cable with DIN Plug and
Euro Socket

Connects to the small, standard vehicle socket. For any 12 V device with a large European-style vehicle plug or cigarette lighter plug, such as hand lamps, small chargers, sat navs etc.

Caution: Not suitable for jump-starting. Illustration only

4 200 Ft (3 307 Ft + ÁFA)  

ADJUSTABLE JOINT KITS

LSL Footpegs Joint Kits
Adjustable

Correctly adjusted? - the appropriate foot position by means of adjustable footrest hinges

The latest development from LSL. CNC-milled footrest hinges with 8 possible adjustments and optimal adjustment range.

This gives the versatility to suit racers and tourers alike. A high, sporty position and a comfortable, low position are both equally possible. And if you like to vary your position now and then, all you need is a hexagon key to make a quick and easy adjustment. It just a matter of individual preference.

How it works:
The LSL is adjusted by means of a circular lever screw mechanism with a radius of 25 mm. This gives a choice of 8 different positions (see the example in the picture). The hinges come with type approval for Germany.

Please choose the correct hinge kit for your model (see above on the right side).

Footrests are not included. Please order the footrests separately in your choice of colour (see below: "Compatible products").

Important note:
If the footrests are positioned low down, the soles of your boots may touch the exhaust. Furthermore, positioning the footrests a long way forwards or backwards may change the distance from the gear shift and therefore have an effect on shifting. Always make sure that foot brake operation is not impeded in any way!

When adjusting the footrest hinges, always make sure that safety is not affected in any way.

31 480 Ft (24 787 Ft + ÁFA)  

air filter mat

air filter mat
universal 750 x 500 x 14 mm

Luftfilter sind für den Motorradmotor lebenswichtig. Ist klar. Und ab und zu - in Abhängigkeit von deinen Fahrgewohnheiten - solltest du Luftfilter austauschen. Schließlich will so ein Motor frei atmen, um seine volle Leistung zu bringen. Aber musst du deshalb auch immer das "Drumherum", wie z. B. Rahmen, Gehäuse oder irgendwelchen Kunststoffteile bezahlen, in denen das neue Luftfiltermaterial eingepasst und verspannt ist? Eigentlich nicht. Hol dir die Luftfilter-Matte *Universal*, fertig.

Aus dieser Luftfilter-Schaumstoffmatte mit den Abmessungen (B x H x T): ca. 750 x 500 x 14 mm, schneidest du dir dann das passende Stück heraus und befestigst es beispielsweise mit Draht oder Kabelbindern an/in deinem Luftfiltergehäuse. In jedem Fall so, dass der Motor keine Nebenluft ziehen kann. Zum nächsten Luftfiltertausch kannst du die Universal-Filtermatte auswaschen und (natürlich trocken) wiederverwenden.
Eine einfache Möglichkeit, den Luftfilter in diversen Motorrädern und Rollern zu ersetzen.

  • Material: Schaumstoff
  • Abmessungen 750 x 500 x 14 mm

2 800 Ft (2 205 Ft + ÁFA)  

AIRMAN AIR COMPRESSOR

Airman "Tour" Air Compressor
Inclusive Adapter

What do you do when you're in the middle of nowhere, miles from the next service station, and suddenly you have a motorcycle or car tyre that is as flat as a pancake. This situation calls for the AirMan "Tour" tyre inflator in the compact version!


Safely stowed under your seat, in a glove compartment, side case or the boot/trunk of your car, the AirMan is ready in an instant. Simply connect to the vehicle battery and pump up the tyre or tyres. And you're ready to continue your journey ...

  • Equipped with 12 V cigarette lighter socket plug and 3.40 m long cable
  • Fabric-covered hose, approx. 28 cm long
  • Integrated pressure display in bar and psi
  • Max. capacity 5 bar
  • Average power consumption 5 A (60 W)
  • Max. power consumption 10 A (120 W)
  • Adapter for bicycle tyres, balls etc.
  • Compressor dimensions (HxWxD) approx. 152 x 120 x 60 mm

Performance examples:

  • 4 bar in 1 minute (e.g. bicycle tyre)
  • 2.5 bar in 4 minutes (e.g. motorcycle tyre with a volume of approx. 15 litre)
  • 2.5 bar in 6.5 minutes (e.g. compact car tyre with a volume of approx. 25 litres)
  • 2.5 bar in 8.5 minutes (e.g. mid-size car tyre with a volume of approx. 36 litres)


Good to know:
The AirMan may not function on BMWs with CAN bus system. If your vehicle's power socket has a power limiter, it may be necessary to install an additional, independent socket.

9 800 Ft (7 717 Ft + ÁFA)  
 

AKRAPOVIC ADAPTER + CAT

AKRAPOVIC Manifold Adapter

Akrapovic manifold adapter with catalytic converter:

When installing some Akrapovic exhaust systems, the original cat is dispensed with. For these systems, we offer manifold adapter tubes with integral Akrapovic retrofit catalytic converter, as otherwise the EC approval for the system would lapse. The adapter tube is made of stainless steel. If necessary, please see "important notes" which are attached to the exhaust systems.

133 000 Ft » 119 700 Ft (94 252 Ft + ÁFA)  
 

AKRAPOVIC LINK PIPE

AKRAPOVIC Link Pipe

To install the AKRAPOVIC exhausts on the BMW R nineT, you will need an additional manifold adapter pipe.

You have a choice of two versions:

  • LOW: The exhaust is installed in the standard position using the adapter pipe.
  • HIGH: The exhaust is installed in the high-mount position using the adapter pipe. Carbon heat shields included. Please note: The pillion footrests have to be removed!

Material: Titanium

To check whether this is necessary, please refer to the "Important Information" footnotes for the individual exhaust systems.

77 000 Ft » 69 300 Ft (54 567 Ft + ÁFA)  
 

AKRAPOVIC RACING-LINE

Akrapovic Racing-Line
Racing-Style Exhaust

If you're looking for the ultimate racing-style exhaust system, you should definitely check out the Racing Line from Akrapovic. Specially designed for bikers who want to get the most out of their machine, these systems offer an excellent balance between optimal performance and outstanding price. They are considerably lighter than stock exhausts, as well as offering both top quality and increased engine performance.

You can look forward to optimised performance over the entire rpm range, which in turn means that your machine will give you a better, sportier ride by boosting engine power and torque. The shape of the silencer sleeve creates that special racing look, while the pure racing sound will take your breath away. Like all Akrapovic exhaust systems, the Racing Line has been tested on computer-controlled dynos. With EC type approval.

199 500 Ft » 175 000 Ft (137 795 Ft + ÁFA)  
 

AKRAPOVIC RETROFIT

AKRAPOVIC Retrofit Catalytic Converters

Akrapovic retrofit catalytic converters:

When some Akrapovic exhaust systems are installed, the original catalytic converter is discarded. For these systems we offer an Akrapovic retrofit catalytic converter, as otherwise the EC approval would lapse. If necessary, please see "important notes", which are attached to the exhaust systems.
Akrapovic uses high-performance cats which are guaranteed to give you the enhanced sound and performance boost that you expect from Akrapovic exhaust systems. The catalytic converter is a honeycomb structure made of metal, which contains valuable metals (palladium, rhodium and platinum) on the surface. These metals convert the toxic carbon monoxide and unburned hydrocarbon in the exhaust gases into non-toxic carbon dioxide and water vapour.

35 000 Ft » 31 500 Ft (24 803 Ft + ÁFA)  
 

AKRAPOVIC SCOOTER LINE

Akrapovic Scooter-Line
titanium, carbon & stainless steel

Akrapovic is famous for unique, innovative high-tech exhaust systems, manifolds and rear silencers which are among the most high-performance in the world. Akrapovic is also heavily involved in the scooter market. The Slip-On (rear silencers) and Racing-Line products (complete systems) are manufactured from carbon, stainless steel, stainless black or titanium and deliver impressive performance and technology.

Get more out of your motorcycle.

These products are supplied with complete installation kits, instructions and type approval.

175 000 Ft » 157 500 Ft (124 016 Ft + ÁFA)  
 

AKRAPOVIC SLIP-ON LINE

AKRAPOVIC Slip-on Line Silencer
Titanium or Carbon

When it comes to silencers, you can trust the experts with world championship experience! The slip-on silencers from Akrapovic are developed by the same engineers who create unique exhaust systems for the machines ridden by the likes of Rossi and Lorenzo.

What do they bring to the table? Improved handling thanks to lower weight, for example. And better acceleration due to reduced exhaust backpressure. Plus a superb yet street-legal sound produced by the sound engineers. Last but not least, long-lasting enjoyment ensured by premium materials and precision manufacturing.

All the silencers in the slip-on product line are individually tailored to a specific motorcycle model, and the optimal accuracy of fit makes them easy to install. Visually too, Akrapovic exhaust systems are designed to blend harmoniously with the lines of the particular machine, so the rear silencers come in a wide range of shapes and finishes!

This makes it essential to look at the downloadable images for your motorcycle and also the "Important information".

168 000 Ft » 150 500 Ft (118 504 Ft + ÁFA)  

  1 2 3 4 5 6 ... 178 179 180