Budapest, XIII. Ker. Lehel u. 54. (Kartács u. sarok) Tel.: 06-20 988 13 13

 
Keresés
 
Motorom
Belépés / Regisztráció
Kosár   [0]
Gyártó
Felépítés
Hengerűrtartalom (ccm)
Motortípus
 


Alkatrész kereső   |   Fékfolyadék

CASTROL BRAKE FLUID

Castrol brake fluid
DOT4

Castrol high-performance brake fluid for motorcycles and scooters

Compatible with all braking systems, including with ABS, and also for extreme thermal loads.

This product offers excellent braking performance, maximum safety and long-lasting protection for all brake system components. In addition, a higher boiling point gives a large margin of safety. This brake fluid is suitable for both on-road and off-road use.

  • Technical details:

Dry boiling point: approx. 275°C
Wet boiling point: approx. 185°C
Exceeds DOT3 and DOT4 specifications.

IMPORTANT!
Brake fluid corrodes vehicle paintwork and fairing elements made of plastic or rubber, etc.

3 500 Ft (2 756 Ft + ÁFA)  

LUCAS FÉKFOLYADÉK

LUCAS FÉKFOLYADÉK

DOT 4

  • magas teljesítményű fékfolyadék, mely hosszú élettertamot garantál a fékalkatrészeknek
  • ABS és ABS nélküli motorokhoz
  • 250ml
  • forráspont: 269°C
  • nedves forráspont: 170°C

DOT 5.1

  • magas teljesítményű fékfolyadék, főleg versenymotorok számára
  • ABS és ABS nélküli motorokhoz
  • 250ml
  • forráspont: 272°C
  • nedves forráspont: 184°C

Fontos!

A fékolaj megmarja a műanyag, gumi és lakkozott alkatrészeket.

1 750 Ft (1 378 Ft + ÁFA)  

MOTUL BRAKE FLUID

Motul Brake Fluid
DOT 3 & 4, fully synthetic

Motul DOT 3 & 4 Brake Fluid is a fully synthetic polyglycol-based brake fluid for disc and drum brake systems.

  • Standards: DOT 3 & DOT 4, SAE J 1703, ISO 4925
  • can be mixed with all DOT 3, DOT 4 and DOT 5.1 products
  • exceptionally durable due to high wet boiling point
  • high thermal stability due to high dry boiling point
  • high safety standard
  • enables the brake system to operate efficiently under extreme conditions
  • corrosion-proof; behaves neutrally towards seals in the braking system
  • Replacement intervals: between 12 and 24 months (depending on manufacturer's recommendation)

Good to know:
For safety reasons, brake fluids such as Motul Brake Fluid DOT 3 & 4 should never be topped up; they should always be replaced instead!

Carefully close containers following use to prevent moisture absorption. Only store brake fluid in original container.

WARNING:
Cannot be mixed with silicone-based brake fluids (DOT 5) and special mineral-based fluids (e.g. LHM). Fluid may affect vehicle paintwork.

Caution. Causes serious eye irritation. May cause damage to organs through prolonged or repeated exposure.

2 800 Ft (2 205 Ft + ÁFA)  

MOTUL BRAKE FLUID

Motul Brake Fluid DOT 5.1
Fully synthetic!

Motul Brake Fluid DOT 5.1 is a fully synthetic polyglycol-based brake fluid for disc and drum brake systems with DOT 5.1, DOT 4 and DOT 3 manufacturer's recommendation. Especially suitable for vehicles with anti-lock braking system (ABS).

  • Standards: DOT 3, DOT 4, DOT 5.1, SAE J 1703, ISO 4925
  • can be mixed with all DOT 3, DOT 4 and DOT 5.1 products
  • can be mixed with the predecessor Motul HYDRAULIK DOT 5.
  • exceptionally durable due to high wet boiling point
  • more efficient fluid circulation in the precision mechanism of anti-lock braking systems (ABS)
  • corrosion-proof; behaves neutrally towards seals in the braking system
  • Replacement intervals: between 12 and 24 months (depending on vehicle manufacturer's recommendation)

Good to know:
Only keep residual brake fluid in carefully sealed original containers to prevent absorption of moisture.

For safety reasons, brake fluids should never be topped up; they should always be replaced instead!

WARNING:
Cannot be mixed with silicone-based brake fluids (DOT5) and special fluids such as LHM. Fluid can affect
vehicle paintwork.

3 500 Ft (2 756 Ft + ÁFA)  

MOTUL RBF 660 BRAKE FLUID

Motul RBF 660 Racing Brake Fluid
DOT 4, fully synthetic, 0.5 litres

Brake like the professionals! Lap after lap, high-speed straight followed by tricky chicane - accelerating, braking, giving full throttle, slamming on the brakes. All the time pushing yourself and your bike to the limit. This sort of racing puts huge demands on both the rider and the machine and its brakes. So your brake fluid needs to be up to the job, too. *RBF 660 Factory Line* racing brake fluid from Motul is formulated to withstand the toughest conditions.

This polyglycol-based, fully synthetic racing brake fluid is specially formulated for racing. It's compatible with all brake systems used in motorcycle racing. But it can also be used in conventional brake and hydraulic clutch systems. SAE J 1703, ISO 4925, FMVSS 116

  • Exceeds conventional polyglycol-based brake fluids (DOT 3 & DOT 4, DOT 5.1)
  • Can be mixed with all DOT 3, DOT 4 and DOT 5.1 products, but this is not recommended
  • Extremely high dry boiling point of 328°C, compared with other silicone- and polyglycol-based products, ensures safe braking under the most extreme riding conditions
  • Very high wet boiling point of 205°C for safer braking when humidity is high, or if it rains during the race
  • During a race, your brakes have to withstand enormous thermal loads, so you should check your MOTUL RBF 660 after every other race, at the least, and change the fluid if necessary
  • Brake fluid absorbs moisture from the ambient air, and this lowers the boiling point. For this reason, MOTUL RBF 660
  • must always be stored in its original container, well sealed and under constant climatic conditions

Good to know:
For safety reasons, brake fluids such as Motul RBF 660 Factory Line should not be topped up, but instead you should do an oil change!

Carefully close containers following use to prevent moisture absorption. Only store brake fluid in original container.

WARNING:
Must not be mixed with silicone-based brake fluids (DOT5) or special fluids such as LHM. Fluid may harm vehicle paintwork.

Causes serious eye irritation.

7 000 Ft (5 512 Ft + ÁFA)  

PROCYCLE FÉKFOLYADÉK

PROCYCLE FÉKFOLYADÉK

Kitűnő fékhatás, hosszantartó biztonság. High-quality termék, megfelel a FMSVV No. 116 DOT 4, SAE J1703, ISO 4925 előírásoknak. Nem használható olyan motorokhoz, ahol ásványi folyadékot ír elő a gyártó. Ne keverjük más típusú fékfolyadékokkal! Az egyik vezető márka Louis számára gyártott márkaterméke.

  • forráspont szárazon: 265°C
  • forráspont nedvesen: 173°C

Fontos!

A fékolaj megmarja a műanyag, gumi és lakkozott alkatrészeket.

3 500 Ft (2 756 Ft + ÁFA)  

Procycle Silicone Brake Fluid DOT 5

Procycle Silicone Brake Fluid DOT 5
Contains: 250 ml

Procycle Silicone Brake Fluid DOT 5 is a high-performance product specially developed for the requirements of hydraulic motorcycle braking systems (drum & disc brakes). It ensures outstanding braking performance at all times for maximum safety.

Special ingredients protect the internal components of the braking system against deposits and corrosion, and provide optimum continuous lubrication of all seals. Procycle silicone-based brake fluid has a significantly longer service life than conventional brake fluids because it is non-hygroscopic (does not absorb water). It will not damage paintwork, polished aluminium, chrome or plastic parts.

Technical details:

  • Dry boiling point: approx. 260°C
  • Wet boiling point approx. 180°C
  • Non-hygroscopic

IMPORTANT: Never mix DOT 5 brake fluid with conventional glycol-based brake fluids with DOT 3, 4 or 5.1 specifications. Danger!

Contains: 250 ml

Good to know:
This brake fluid is specified for use in Harley-Davidson and Buell motorcycles with OEM braking system manufactured between roughly 1976 and 2004/2005 (Important: Always follow the vehicle manufacturer's specifications!)

Even DOT 5 silicone brake fluid absorbs moisture from the air, but does not bind it. Therefore DOT 5 silicone must be changed regularly, like other brake fluids.

DOT 5 silicone is not suitable for vehicles with ABS braking systems!

Harmful if swallowed. Causes skin irritation. May be carcinogenic. Harmful to aquatic life with long lasting effects.

5 250 Ft (4 134 Ft + ÁFA)  

TRW BRAKE FLUID

TRW Brake Fluid
DOT 4 Grand Prix, 1 L.

  • DOT 4 Grand Prix is specially developed to meet the increase in safety requirements and for racing where the use of sintered metal pads increases temperatures

Contains: 1 litre

Technical details:

  • Dry boiling point: approx. 300°C

Wet boiling point: approx. 195°C.

IMPORTANT:
Brake fluid corrodes vehicle paintwork and fairing elements made of plastic or rubber, etc.

Harmful if swallowed, Risk of serious damage to eyes, Possible risk of harm to the unborn child

7 000 Ft (5 512 Ft + ÁFA)  

TRW BRAKE FLUID DOT 5

TRW DOT 5 Silicone brake fluid
250 ml.

TRW DOT 5 Silicone Brake Fluid is a high-performance product specially formulated for vehicles with braking systems that require brake fluid which meets the DOT 5 specification (silicone-based).

  • TRW DOT 5 Silicone Brake Fluid gives optimal braking performance for maximum safety.
  • The formulation is designed to give effective protection against corrosion and deposits. Seals in the hydraulic system are optimally lubricated.
  • TRW DOT 5 Silicone Brake Fluid is not hygroscopic (i.e. does not absorb moisture) and will not damage painted surfaces, aluminium, chrome or plastic parts.
  • DOT 5 brake fluid is specified for Harley-Davidson and Buell motorcycles from roughly 1976 to 2004/2005 with the original braking system (Important: Always follow the vehicle manufacturer's instructions for your model!).

Technical details:

  • Dry boiling point: 260°C
  • Non-hygroscopic
  • IMPORTANT: Cannot be mixed with brake fluids with DOT 3, 4 or 5.1. specification!!!

Contains: 250 ml.

7 000 Ft (5 512 Ft + ÁFA)  

TRW FÉKFOLYADÉK DOT5.1

  • verseny körülményekhez kifejlesztett fékfolyadék
  • ABS-es motorokhoz is
  • száraz forráspont: 272°C
  • nedves forráspont: 184°C
  • 250 ml
2 450 Ft (1 929 Ft + ÁFA)