Budapest, XIII. Ker. Lehel u. 54. (Kartács u. sarok) Tel.: 06-20 988 13 13

 
Keresés
 
Motorom
Belépés / Regisztráció
Kosár   [0]
Gyártó
Felépítés
Hengerűrtartalom (ccm)
Motortípus
 


Alkatrész kereső   |   Festékek

BRUNOX EPOXY RUST

Brunox epoxy rust converter
150 ml

Unless you find the rust bucket look particularly attractive for a motorcycle, you should use BRUNOX Epoxy Rust Converter to put a stop to corrosion.

BRUNOX Epoxy is the only patented rust converter and priming system all in one, containing epoxy resins. The amber-coloured clear solution produces an organic metal complex on iron/steel, which prevents rust formation and, at the same time, acts as a perfect priming coat.

The key advantages:

  • Good compatibility with most standard vehicle paints
  • Penetrates approx. 7-10 times deeper into the rust pores than rust converter emulsions
  • Unlimited shelf life in the well sealed container
  • Free of heavy metals and mineral acids

Application in three steps:
1. Sand/brush off loose rust and wipe down
2. Spray from the can 3 to 4 times, and allow to dry
3. Apply top coat

Capacity: 150 ml

Please note:

  • Always take the usual precautions for handling chemicals
  • Avoid contact with the eyes and skin
  • Do not inhale gases/vapours/aerosols

Facemask:

  • Wear a facemask if ventilation is inadequate
  • For short periods or low level exposure, use a filter mask; for longer periods or higher level of exposure, use a self-contained breathing apparatus
  • Short-term filter mask: Filter A/P2, Filter AX
  • Hand protection: Glove material: nitrile rubber, butyl rubber
  • Eye protection: tightly sealing protective goggles

Extremely flammable aerosol, Pressurised container: may burst if heated, Causes serious eye irritation, May cause drowsiness or dizziness, If medical advice is needed, have product container or label at hand., Keep out of reach of children., Read label before use., Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking., Do not spray at open flame or other ignition sources., Do not pierce or burn, even after use., Use only outdoors or in well-ventilated areas., Wear protective gloves/protective clothing/eye protection/face protection., IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing., Store locked up., Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.

5 250 Ft (4 134 Ft + ÁFA)  

COLORMATIC 2-K CLEAR COAT

Colormatic 2K Clear Coat
200ml, Shiny

ColorMatic 2K (two-component) clear lacquer "shiny" by Dupli-Color:

This high-gloss, extremely scratch-resistant and resilient 2-component clear coat is highly resistant to petrol, UV radiation and weathering.

Quick-drying, spreads very well. Ideal for clear coating of Dupli-Color metallic spray paint, "normal" spray paint and silver wheel paint.

Contains: 200 ml

Extremely flammable aerosol, Flammable aerosol., Extremely flammable liquid and vapour., Highly flammable liquid and vapour, Flammable liquid and vapour, Flammable solid, Pressurised container: may burst if heated, May cause allergic skin reaction, Causes serious eye irritation, May cause drowsiness or dizziness, If medical advice is needed, have product container or label at hand., Keep out of reach of children., Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking., Do not spray at open flame or other ignition sources., Do not pierce or burn, even after use., Do no breathe dust/fumes/gas/mist/vapour/spray., Wear protective gloves/protective clothing/eye protection/face protection., IF ON SKIN:, Wash with plenty of water and soap., Protect from sunlight., Do not expose to temperatures exceeding 50°C/122°F.

6 300 Ft (4 961 Ft + ÁFA)  

DUPLI COLOR ALKYTON HEAT

Dupli-Color Brush Paint Alkyton
250ml, Heat Resistant

Dupli-Color Alkyton heat-resistant topcoat:

Heat-resistant coating for use on new, bare or shot-peened steel or on pre-treated, finished surfaces such as exhaust pipes, barbecues, heating systems etc. Heat-proof up to 750°C (dry). Perfect for maintenance and repair work.

Colour: black
Contents: 250 ml

Flammable liquid and vapour, May cause drowsiness or dizziness, If medical advice is needed, have product container or label at hand., Keep out of reach of children., Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking., Keep cool., Do no breathe dust/fumes/gas/mist/vapour/spray., Avoid releasing into the environment., IF ON SKIN (or hair):, Seek medical advice/attention if you feel unwell., Rinse skin with water/shower., Immediately take off all contaminated clothing., Store in a well-ventilated place., Store locked up.

4 200 Ft (3 307 Ft + ÁFA)  

DUPLI COLOR EXHAUST PAINT

Dupli-Color Exhaust Paint
400ml, upto 800°C

High heat paint, withstands temperatures up to 800°C, ideal for engine blocks, cylinders, exhausts etc. Available in matt black or silver.

Important: Apply two thin coats holding the spray can approx. 25 cm from the surface. Leave to dry. The thinner the paint coat, the better the heat resistance and adhesion.

Contains: 400 ml

Important: This product is not suitable for use on titanium exhaust systems or exhaust manifolds, as these become extremely hot, reaching temperatures far above 800°C.

Extremely flammable aerosol, Pressurised container: may burst if heated, Causes skin irritation, Causes serious eye irritation, May cause drowsiness or dizziness, Harmful to aquatic life with long lasting effects, Harmful in contact with skin or if inhaled, If medical advice is needed, have product container or label at hand., Keep out of reach of children., Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking., Do not spray at open flame or other ignition sources., Do not pierce or burn, even after use., Do no breathe dust/fumes/gas/mist/vapour/spray., Use only outdoors or in well-ventilated areas., Wear protective gloves/protective clothing/eye protection/face protection., Protect from sunlight., Do not expose to temperatures exceeding 50°C/122°F.

5 250 Ft (4 134 Ft + ÁFA)  

DUPLI COLOR EXHAUST PAINT

Dupli-Color Exhaust Paint
500 ml, up to 800°C

High heat paint, withstands temperatures up to 800°C, ideal for engine blocks, cylinders, exhausts etc.

Important: Apply two thin coats holding the spray can approx. 25 cm from the surface. Leave to dry. The thinner the paint coat, the better the heat resistance and adhesion.

Contains: 500 ml

Important: This product is not suitable for use on titanium exhaust systems or exhaust manifolds, as these become extremely hot, reaching temperatures far above 800°C.

Danger., Extremely flammable aerosol., Pressurised container: may burst if heated., Causes skin irritation., Causes serious eye irritation., May cause drowsiness or dizziness., Toxic to aquatic life with long lasting effects.

5 250 Ft (4 134 Ft + ÁFA)  

DUPLI COLOR RALLYE PAINT

Dupli-Color Rallye Paint
400ml

Car's Rally Spray Paint:

  • The paint with countless uses.
  • Overcoating, touching up, laminating, contrast paint finishes. Nothing is impossible.
  • Excellent opacity.

Extremely flammable aerosol, Pressurised container: may burst if heated, Causes serious eye irritation, May cause drowsiness or dizziness, Keep out of reach of children., Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking., Do not spray at open flame or other ignition sources., Do not pierce or burn, even after use., Do no breathe dust/fumes/gas/mist/vapour/spray., Protect from sunlight., Do not expose to temperatures exceeding 50°C/122°F.

2 450 Ft (1 929 Ft + ÁFA)  
 

DUPLI-COLOR BRAKE CALIPER

Dupli-Color brake caliper paint-set

At last your custom bike is almost ready for the road. You've finished the paint job, except that the original brake calipers look very tired. No problem! This is the perfect job for the Dupli-Color Brake Caliper Paint Kit in black or red!

If the existing paint has faded, or dirt and brake dust have taken their toll on your calipers, Dupli-Color will soon have them looking like new again.

Brake Caliper Cleaning Spray

  • Special, metal-friendly solvent formulation
  • Removes oil, grease, dirt and lubricants from brakes without a trace
  • Also suitable for cleaning engines, pumps, pipes etc.
  • Corrosion- and chemical-resistant
  • Non-conductive

Brake caliper paint + hardener

  • High-quality 2-component acrylic paint + hardener
  • Fast-drying
  • Lead-free
  • Long-lasting gloss
  • Heat-resistant up to 140°C
  • Weather-resistant
  • Fuel-resistant
  • Excellent adhesion and hiding power
  • Hard, smooth finish is dirt-resistant

Kit contains:

  • 400-ml can of brake caliper cleaning spray
  • 150-ml can of paint for brush application, in black or red
  • 50-g tube of hardener
  • 1 brush + 1 stirrer

Good to know:
You can also use the Dupli-Color Brake Caliper Paint Kit to give your car's brake calipers a stylish look. Looks great in combination with sport and alloy wheels.

Repeated exposure may cause skin dryness or cracking, Flammable liquid and vapour, Causes skin irritation, May cause allergic skin reaction, Causes serious eye irritation, May cause allergy or asthma symptoms or breathing difficulties if inhaled, May cause drowsiness or dizziness, May cause damage to organs through prolonged or repeated exposure, Harmful to aquatic life with long lasting effects, Harmful in contact with skin or if inhaled, If medical advice is needed, have product container or label at hand., Keep out of reach of children., Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking., Do no breathe dust/fumes/gas/mist/vapour/spray., Use only outdoors or in well-ventilated areas., Wear protective gloves/protective clothing/eye protection/face protection., Call a POISON CENTRE or a doctor/physician if you feel unwell., IF ON SKIN: Wash with plenty of water and soap., Store locked up., Store in a well-ventilated place. Keep cool., Contains isocyanates. May produce an allergic reaction., Dispose of contents/container in compliance with local regulations.

8 050 Ft » 6 300 Ft (4 961 Ft + ÁFA)  

FEHÉR ABRONCS FESTÉK FILC

  • az abroncs fliratainak, logojának kiemelésére
  • fehér
  • 10 ml
     
1 750 Ft (1 378 Ft + ÁFA)  

FOLIATEC FOAM CLEANER

FOLIATEC FOAM CLEANER
SEAT&LEATHER,400ML,INDIV.

Cleaning made easy: the Interior Color Spray Foam Cleaner for plastics and faux or real leather. Spray on and leave just one minute for the foam to dissolve the dirt. Then simply wipe off and give a good brushing. To finish, rub over with a damp cloth.

  • Ideal for plastics
  • Quick-acting
  • Deep cleaning action

Contains: approx. 400 ml

Good to know:
Also highly effective for removing nicotine stains on the roof liner.

3 130 Ft (2 465 Ft + ÁFA)  
 

FOLIATEC SEALANT, CLEAR

FOLIATEC SEALANT, CLEAR
SEAT & LEATHER SEAL. SPR.

Foliatec seat & leather sealant is ideal for protection and finishing with a gloss sealing coat following application of Foliatec seat & leather colour spray. The clear sealant forms a permanent, resilient additional coat. Once dry, it will not discolour when touched. The surface texture is retained.

  • clear
  • does not peel off
  • easy to apply

Extremely flammable aerosol, Pressurised container: may burst if heated, Causes serious eye damage, May cause drowsiness or dizziness

5 230 Ft » 4 530 Ft (3 567 Ft + ÁFA)  
 

FOLIATEC SPRAY FILM

Foliatec Spray Film
400ml Per Piece

FOLIATEC.com Spray Film:

With this flexible coating, you can try out a new look for your wheels, small parts or fairing in an instant. Simply clean the surface with silicone remover, mask off any surrounding areas, apply four thin spray coats, and after approx. 30 minutes the component is ready to re-install. You can remove the coating at any time from smooth surfaces, without leaving any residues, simply by peeling it off! Protects against stone chip damage. Suitable for application on most smooth surfaces (peelability is limited on rough surfaces). Can be used on original paintwork.

Content: 400 ml and assembly instruction included

Does not provide adequate rust protection on bare steel. Compatibility with repainted or touched-up surfaces cannot be guaranteed.

Extremely flammable aerosol, Pressurised container: may burst if heated, Causes serious eye irritation, May cause drowsiness or dizziness, Harmful to aquatic life with long lasting effects, If medical advice is needed, have product container or label at hand., Keep out of reach of children., Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking., Do not spray at open flame or other ignition sources., Do not pierce or burn, even after use., Avoid breathing dust/fumes/gas/mist/vapour/spray., Wear protective gloves/protective clothing/eye protection/face protection., IF INHALED:, IF IN EYES:, Remove contact lenses, if present and easy to do. Continue rinsing., Remove person to fresh air and ensure they can breathe freely., Rinse cautiously with water for several minutes., Store locked up., Protect from sunlight., Do not expose to temperatures exceeding 50°C/122°F.

8 730 Ft » 7 000 Ft (5 512 Ft + ÁFA)  

FOLIATEC SPRAY FILM

Foliatec spray film remover
400ml

Quick, easy and effective.

Spray Film Remover is ideal for removing spray film that has been applied too thinly, or getting rid of the last traces of old spray film. It is specially formulated to make light work of removing spray film.

How to use: Spray on and leave to work for a minute. Then wash off the spray film with a pressure washer.

Extremely flammable aerosol, Pressurised container: may burst if heated, Causes skin irritation, May cause allergic skin reaction, Causes serious eye irritation, May cause drowsiness or dizziness, Toxic to aquatic life with long lasting effects

2 780 Ft (2 189 Ft + ÁFA)  

FOLIATEC SPRAY FILM

Foliatec Spray Film
Sealer 400 ml

Foliatec Spray Film Sealer is the ideal way to permanently seal Foliatec spray film. The increased layer thickness makes for easier removal. It also provides additional protection against damage and facilitates cleaning.

Easy to apply: Once the spray film has dried, apply two cross-coats of sealer, allowing a flash time of 10 minutes between coats.

  • Available in matt and gloss
  • Seals the spray film permanently
  • Easier cleaning
  • Protects against dirt and damage
  • Even easier removal
  • Keeps colours fresh for longer, especially light colours
  • 1 can is sufficient for 4 wheel rims

The clever thing is: all matt and metallic colours can be turned into gloss colours, and conversely all gloss colours can be made into matt highlights.

Extremely flammable aerosol, Pressurised container: may burst if heated, Causes serious eye irritation, May cause drowsiness or dizziness, Harmful to aquatic life with long lasting effects

4 530 Ft (3 567 Ft + ÁFA)  

FOLIATEC SPRAY FILM

Foliatec Spray Film
Sealer Shine 400 ml

Foliatec Spray Film Sealer is ideal for permanently sealing Foliatec Spray Film. The increased layer thickness makes it easier to remove the film again. It also protects against damage and makes for easier cleaning.

Simple to use: Once the spray film has dried, apply the sealer in two cross coats (i.e. spraying up-and-down and side-to-side) with a 10-minute gap between the coats.

  • "Shine" effect (metallic)
  • Seals the spray film permanently
  • Makes for easier cleaning
  • Protects against dirt and damage
  • Film is even easier to remove again
  • Keeps colours fresh for longer, especially light colours
  • 1 can is sufficient for 4 wheel rims

Extremely flammable aerosol, Pressurised container: may burst if heated, Causes serious eye irritation, May cause drowsiness or dizziness, Harmful to aquatic life with long lasting effects

5 230 Ft (4 118 Ft + ÁFA)  

PRESTO STOP RUST PRIMER

Presto Rust Converter and Primer
100ml

PRESTO Rust Converter:

Dual effect:

  • The organic, environmentally friendly rust protection emulsion and primer.
  • Time-saving rust removal.
  • Ideal as primer coat for subsequent filling and paint system.
  • Especially recommended where corrosion has penetrated deep into the metal and cannot be completely removed by sanding.
  • Also for treating rust in areas that you cannot reach with a grinder.

Contains: 100 ml.

2 800 Ft (2 205 Ft + ÁFA)