Budapest, XIII. Ker. Lehel u. 54. (Kartács u. sarok) Tel.: 06-20 988 13 13

 
Keresés
 
Motorom
Belépés / Regisztráció
Kosár   [0]
Gyártó
Felépítés
Hengerűrtartalom (ccm)
Motortípus
 


Alkatrész kereső   |   Karburátorok
 

DYNOJET CARBURETOR KITS

Dynojet Carburetor Kits

Whether cruiser, touring bike or sports bike, Dynojet carburettor kits offer an inexpensive and effective way to retune the carburettors on any type of motorbike. Dynojet kits boost performance and rideability, while also optimising fuel consumption.

  • Fuel needle

When developing a new carburettor kit, our engineers devote great attention to the perfect design of the fuel needle. This component is fully adjustable, and delivers the correct fuel quantity in the middle speed range, with little or no influence (according to the design) at engine speeds below 3,000 rpm. The needle tip is designed so as to ensure minimal influence, if any at all, in the upper speed range. The purpose of this needle design is to separate all the ranges (idling, part throttle, full throttle) so as to allow fast and effective tuning of the middle speed range.

  • Main air correction jet

This jet regulates the air feed to the needle jets. Air is premixed with the fuel drawn in from the float chamber, and then exits at the venturi in the direction of the throttle valve. On some models, Dynojet modifies the main air correction jets in order to achieve the best possible air/fuel mixture.

  • Idle system

100% of idling and 25% of the transition from idling to part throttle is influenced by the idle system. In some models, the idle jets are exchanged in order to optimise fuel consumption. Correct synchronisation of the carburettor is essential for "stable" idle.

  • Main jet

Dynojet main jets are developed to support the following functions: Static load and dynamic load. During slow acceleration in higher gears, we refer to the fuel quantity flowing through the main jets as static load. During rapid acceleration, or when the slide valve is opened abruptly, we refer to the fuel quantity flowing through the main jets as dynamic load. All the kits come with installation instructions, which describe every step in detail. In order to cover all possible applications, Dynojet supplies carburettor kits with various upgrades. These kits are manufactured with extreme precision and subjected to constant testing.

  • Stage 1 kits

Developed for motorbikes with production engine, original airbox and production exhaust. Of course, "good" aftermarket exhausts or aftermarket filter cartridges can also be tuned with these Stage 1 kits. Stage 1 kits improve response and rideability. As a rule, performance can be increased by up to 5% across the entire speed range.

  • Stage 2 kits

Developed for motorbikes with production or slightly tuned engines, with sport exhausts and modified airboxes. Stage 2 Kits are used on motorbikes where it is not possible to install individual filters, but a modification of the airbox (e.g. removal of the airbox cover on Ducati models) allows performance to be enhanced. As a rule, a performance boost of up to 8% is to be expected.

  • Stage 3 kits

Developed for motorbikes with production or tuned engines, which use K & N individual filters and production or sport exhausts. In most cases, a performance increase of 10%-15% is realistic, but with some short-stroke sport engines, there is some loss of rideability in certain speed ranges. Various tests have demonstrated that it makes no sense to replace closed airbox systems (ram-air) with individual filters, so Dynojet does not supply kits for this particular application.

Note: Due to the performance enhancement, these carburettor kits are not approved for road use under the German Road Traffic Licensing Regulations (StVZO).

24 500 Ft » 21 000 Ft (16 535 Ft + ÁFA)  

JMP CARBURETT. REPAIR SET

JMP CARBURETT. REPAIR SET
VTR1000F FIRE STORM 97-06

Age is the enemy of seals and gaskets As they get older, carburettor gaskets, in particular, tend to stop doing their job effectively, and may allow air and fuel to leak. Then, your smoothly running engine begins to cough and splutter! And if you're really unlucky, it may stop altogether and leave you stranded. So it's a good thing that high-quality carburettor repair kits are available from JMP. Indispensable for giving your carburettors a general overhaul!

  • OEM quality
  • Made in Japan
10 150 Ft (7 992 Ft + ÁFA)  

SAITO KARBURÁTOR FELÚJÍTÓ KÉSZLET

SAITO KARBURÁTOR FELÚJÍTÓ KIT

OEM, (gyári) minőségű készlet, mely minden olyan anyagot tartalmaz, ami a karburátorban az idő múlásával elöregszik. Made in Japan.

A csomag tartalma:

  • tömítések
  • O gyűrűk
  • szeleptű
  • néhány típushoz szelepfészek is (lásd a képeken!)

A csomag 1 karburátor felújításához szükséges alkatrészeket tartalmazza.

3 500 Ft (2 756 Ft + ÁFA)  

SAITO TŰSZELEP KEIHIN/MIKUNI

SZELEPTŰ

Keihin és Mikuni karburátorokhoz

  • OEM minőség
  • Made in Japan
  • 1 db
1 750 Ft (1 378 Ft + ÁFA)  

SCEED 42 SZÍVÓCSONK ROBOGÓ KARBURÁTOROKHOZ

SCEED 42 SZÍVÓCSONK

Az elöregedett szívócsonkot célszerű időben cserélni, nem várni meg az elrepedését, mert a beszívott fals levegő teljesítmény vesztést és akár motor károsodást is okozhat.

3 850 Ft (3 031 Ft + ÁFA)