Budapest, XIII. Ker. Lehel u. 54. (Kartács u. sarok) Tel.: 06-20 988 13 13

 
Keresés
 
Motorom
Belépés / Regisztráció
Kosár   [0]
Gyártó
Felépítés
Hengerűrtartalom (ccm)
Motortípus
 


1 2 3  
Alkatrész kereső   |   Szűrők

AWA (AWAB) BILINCS KÉSZLET

Nélkülözhetetlen az üzemanyag-, és hűtőrendszer javításakor, vagy a kipufogó ideiglenes rögzítésére.

Méretre vágható

  • szalag: rozsdamentes acél
  • szalag hossza: 3 m
  • szalag szélessége: 8 mm
  • csavar: galvanizált acél
  • 8 bilincshez
3 500 Ft (2 756 Ft + ÁFA)  

BRAKE FLUID HOSE

Brake fluid hose, black
1 metre

Brake fluid hose, black, 1 metre.

For the connection between brake cylinder and brake fluid reservoir.

Not suitable as a replacement for pressurised brake lines.

Suitable for DOT 4 and DOT 5.1 brake fluid. Not for silicone brake fluid!!!

Inside dimension: 7 mm
Outside dimension: 12 mm

4 550 Ft (3 583 Ft + ÁFA)  

CARBURETTOR MOUNT

Mount for Dragtron Air Filter

The original air filter on Harleys is usually very large and not particularly good looking. If you intend to remove it and instead fit an aftermarket air filter, you will need a mount to support the carburettor. The mount must also be suitable installing the air filter. This carburettor/air filter mount is designed specially for Dragtron air filters. Suitable for Harley Evolution Sportster models from 1991 onwards, which have a Keihin CV, Mikuni (original H-D) or RevTech carburettor.

  • For (aftermarket) air filters with a straight base plate, such as Pistor Dragtron
  • For mounting on the bleed screws of the cylinder heads
  • Fittings not included
  • Not suitable for Sportster models with injection
14 000 Ft (11 024 Ft + ÁFA)  

CARBURETTOR MOUNT

Mount for Dragtron Air Filter

The original air filter on Harleys is usually very large and not particularly good looking. If you intend to remove it and instead fit an aftermarket air filter, you will need a mount to support the carburettor. The mount must also be suitable installing the air filter. This carburettor/air filter mount is designed specially for Dragtron air filters. Suitable for Harley Evolution Big Twins 1992-1999 and Twin Cam models from 1999 onwards with Keihin CV, Mikuni HSR42/45/48 carburettors and Delphi fuel injection systems (except for touring models from 2008 onwards and trikes from 2011 onwards).

  • For (aftermarket) air filters with a straight base plate, such as Pistor Dragtron
  • For mounting on the bleed screws of the cylinder heads
  • Fittings not included
15 750 Ft (12 402 Ft + ÁFA)  

CHAMPION LEVEGŐSZŰRŐ

Típusspecifikus légszűrők a Championtól, megnövelt szűrő-, és légáteresztő kapacitással.

  • polyurethane tömítése kiválóan szigetel, és nehezen öregszik


 

1 400 Ft (1 102 Ft + ÁFA)  

CHAMPION OLAJSZŰRŐ

Magas minőségű termék vezető gyártótól.

  • minden fém komponens galvanizált korrózióvédelemmel ellátva
  • hajtogatott, erősített szűrőpapír a 100%-os szűrő teljesítmény érdekében
  • a szűrőben bypass szelep

Fontos!

A következő cikkszámok Champion helyett Hiflo szűrők: 10050084, 10050753, 10050452, 10050424

 

1 050 Ft (827 Ft + ÁFA)  

CLAMP SET, 5-PC.

Clamp Set, 5 Pieces
Diameter: 6 mm, width: 12 mm

Clamp sets 5pcs

Clamp sets are the perfect fastenings for brake hoses, cables, wiring harnesses etc. Impacts and vibrations are absorbed by the rubber, and wear to cables and hoses is prevented.

  • Available in a variety of sizes.
  • Made from galvanised steel.
  • Set of 5 clamps.
1 400 Ft (1 102 Ft + ÁFA)  

DELO LEVEGŐSZŰRŐ

A pontos típus meghatározásához használd a MOTOROM gomb alatt található alkatrész keresőnket!

  • top kategória
  • prémium anyagok
  • precíz illeszkedés
  • erős légáram
  • megfizethető ár

 

1 750 Ft (1 378 Ft + ÁFA)  

DELO POWER *P1* DIREKT LÉGSZŰRŐ

  • 5 méretben
  • ha elkoszolódik, tisztítható
  • nem igényel szűrőolajat
  • a megnövekedett légáramlás miatt nagyobb főfúvókára lehet szükség
3 500 Ft (2 756 Ft + ÁFA)  

FABRIC FUEL HOSE 1M

Fabric Fuel Hose, 1 m

NBR/CR fuel hoses with braided fabric reinforcement

Replace your porous or unsightly plastic fuel hose with a new, braided fabric-reinforced and more durable hose!
These fuel hoses are OEM-quality brand products conforming to DIN 73379 1, Type 2A. Made from NBR/CR (interior: acrylonitrile butadiene rubber/exterior: chloroprene rubber), they are more abrasion-resistant than plastic hoses, and offer outstanding temperature and heat resistance. Also suitable for cars.

  • Highly flexible even after years of service
  • Resistant to diesel, petrol (including E10 "green petrol") and fuel oil
  • Temperature-resistant from -40°C to +90°C (up to 110°C for short periods) and will not harden with age
  • Operating pressure: 10 bar
  • Bursting pressure: 30 bar
  • Colour: black
  • Length: 1 metre
  • Material: NBR/CR (acrylonitrile butadiene rubber/chloroprene rubber). Not suitable for continuous immersion in fuel
3 830 Ft (3 016 Ft + ÁFA)  

FUEL FILTER

Plastic Fuel Filter
Connection 6,0 mm/8,0 mm

Petrol Filter, plastic 6 mm/8 mm

Avoid problems with clogged carburettors, rough engine running or reduced performance: use an additional petrol filter! Deposits and rust particles gradually build up in all petrol tanks. When washed out with the petrol, they clog the carburettor and, in extreme cases, can even damage the engine.

Important: This petrol filter is not suitable for diesel fuel or injection systems. It is intended solely for petrol engines with carburettors!

Dimensions and features:

  • Outside dimension (excluding hose connections): 41 mm
  • Outside dimension (including hose connections): 98 mm
  • Diameter: max. 34 mm
  • Suitable for either 6 mm or 8 mm petrol hoses
  • For 8 mm petrol hoses, simply cut hose connections off at the tapers
  • Transparent for easy visual inspection
  • Disposable filter, cannot be cleaned.
1 400 Ft (1 102 Ft + ÁFA)  

FUEL FILTER BMW/TRIUMPH

Fuel Filter for BMW/Triumph/Ducati
Replacement

Model-specific petrol filter for BMW / Ducati / Triumph

This petrol filter is only suitable as a genuine spare part for various BMW, DUCATI and TRIUMPH models. Not designed as a universal filter!

Dimensions and features:

  • Outside dimension (excluding hose connections): 58 mm
  • Outside dimension (including hose connections): 93 mm
  • Diameter: 50 mm
  • Diameter hose coupling: 8 mm
  • Disposable filter - filter element cannot be cleaned!
  • Suitable for many BMW, Ducati and Triumph models
  • For precise details see the bike database
8 750 Ft (6 890 Ft + ÁFA)  

FUEL FILTER CLEAR

Fuel Filter, clear
7,0 mm Connection, flat

Petrol Filter, plastic 7 mm, flat

Avoid problems with clogged carburettors, rough engine running or reduced performance: use an additional petrol filter! Deposits and rust particles gradually build up in all petrol tanks. When washed out with the petrol, they clog the carburettor and, in extreme cases, can even damage the engine.

Important: This petrol filter is not suitable for diesel fuel or injection systems. It is intended solely for petrol engines with carburettors!

Dimensions and features:

  • Outside dimension (excluding hose connections): 31 mm
  • Outside dimension (including hose connections): 60 mm
  • Width x depth: 24 x 17 mm
  • Connection diameter: 7 mm
  • Filter element: plastic mesh
  • Transparent for easy visual inspection
  • Disposable filter; cannot be cleaned!
1 050 Ft (827 Ft + ÁFA)  

FUEL FILTER CLEAR

Fuel Filter, clear
6,0 mm Connection, flat

Petrol Filter, plastic 6.5 mm, flat

Avoid problems with clogged carburettors, rough engine running or reduced performance: use an additional petrol filter! Deposits and rust particles gradually build up in all petrol tanks. When washed out with the petrol, they clog the carburettor and, in extreme cases, can even damage the engine.

Important: This petrol filter is not suitable for diesel fuel or injection systems. It is intended solely for petrol engines with carburettors!

Dimensions and features:

  • Outside dimension (excluding hose connections): 31 mm
  • Outside dimension (including hose connections): 55 mm
  • Width x depth: 24 x 17 mm
  • Suitable for 6.5 mm (1/4 inch) petrol hoses
  • Filter element: plastic mesh
  • Transparent for easy visual inspection
  • Disposable filter; cannot be cleaned!
1 050 Ft (827 Ft + ÁFA)  

FUEL FILTER CLEAR

Fuel Filter Clear
Connection 8,0 mm, round

Petrol Filter, plastic 8 mm, round, connection 90 degree

Avoid problems with clogged carburettors, rough engine running or reduced performance: use an additional petrol filter! Deposits and rust particles gradually build up in all petrol tanks. When washed out with the petrol, they clog the carburettor and, in extreme cases, can even damage the engine.

Important: This petrol filter is not suitable for diesel fuel or injection systems. It is intended solely for petrol engines with carburettors!

Dimensions and features:

  • Outside dimensions (excluding hose connections): 72 mm
  • Outside dimensions (including hose connections): 104 mm
  • Min./max. diameter: 21/30 mm
  • Connection diameter: 8 mm
  • Filter element: plastic mesh
  • Transparent for easy visual inspection
  • Disposable filter; cannot be cleaned!
1 750 Ft (1 378 Ft + ÁFA)  

1 2 3