Budapest, XIII. Ker. Lehel u. 54. (Kartács u. sarok) Tel.: 06-20 988 13 13

 
Keresés
 
Motorom
Belépés / Regisztráció
Kosár   [0]
Gyártó
Felépítés
Hengerűrtartalom (ccm)
Motortípus
 


1 2  
Alkatrész kereső   |   Tömítések, szimeringek

Aluminium washer set for oil

Aluminium washer set for oil
drain plugs, set of 5

  • It's best to fit a new aluminium washer at every oil change!
  • Set of 5.
  • Available in the following sizes (5 washers per set):
  • M 10 x 14 x 1,5 = Order number: 10012326
  • M 12 x 16 x 1,5 = Order number: 10012327
  • M 14 x 18 x 1,5 = Order number: 10012328
  • M 16 x 20 x 1,5 = Order number: 10012329
  • M 18 x 22 x 1,5 = Order number: 10012330
  • M 20 x 24 x 1,5 = Order number: 10012331
  • M 22 x 26 x 1,5 = Order number: 10012332
  • M 24 x 28 x 1,5 = Order number: 10012333

Dimensions: inside diameter x outside diameter x strength

700 Ft (551 Ft + ÁFA)  

ATHENA SZELEPFEDÉL TÖMÍTÉS

Precíz OEM alkatrész, a gyáriva lmegegyező anyagból.

  • Made in EU

A rendelés megkönnyítésére az eredeti gyári alkatrész számokat is feltüntettük a termékvéltozatoknál.

700 Ft (551 Ft + ÁFA)  

ATHENA TÖMÍTÉS SZETT MOTORBLOKKHOZ

Gyári minőségű komplett tömítésszett. A blokkban található összes tömítést tartalmazza, a főtengelyszimeringek kivételével.

  • papír-, gumi, és fém tömítések (deklik, henger, szelepfedél, stb.)
  • O gyűrűk
  • szelepszár szimeringek
  • tűzkarikák
  • Made in EU

A képek illusztrációk.

 

 

5 250 Ft (4 134 Ft + ÁFA)  

BMW VALVE COVER GASKET

Siebenrock Valve Cover Gasket for all
BMW 2V-Boxer Since 69

Siebenrock valve cover gasket:

Valve cover gasket in OEM quality for all BMW 2-valve-Boxer models from 1969 to 1996. Comes per piece.

1 050 Ft (827 Ft + ÁFA)  

CAMSHAFT GASKET SET

Camshaft Gasket Set
BMW 2V Boxer From 09/1980

Siebenrock camshaft gasket set:

BMW 2V Boxer camshaft gasket set for models build Sept. 1980 onwards. Can be used as OEM replacement or when the vehicle is fitted with the Siebenrock asymetric camshaft.

3 500 Ft (2 756 Ft + ÁFA)  

Copper ring set for oil

Copper ring set for oil
drain plugs, set of 5

  • It's best to fit a new copper washer at every oil change!
  • Set of 5.
  • Available in the following sizes (5 washers per set):
  • M 10 x 14 x 1,5 = Best.Nr. 10002919
  • M 12 x 16 x 1,5 = Best.Nr. 10002915
  • M 14 x 18 x 1,5 = Best.Nr. 10002916
  • M 16 x 20 x 1,5 = Best.Nr. 10002909
  • M 18 x 22 x 1,5 = Best.Nr. 10002918

Dimensions: inside diameter x outside diameter x strength

700 Ft (551 Ft + ÁFA)  

COPPER WASHERS FOR

Copper ring set for oil
drain plugs, set of 5

  • It's best to fit a new copper washer at every oil change!
  • Set of 5.
  • Available in the following sizes (5 washers per set):
  • M 10 x 14 x 1,5 = Best.Nr. 10002919
  • M 12 x 16 x 1,5 = Best.Nr. 10002915
  • M 14 x 18 x 1,5 = Best.Nr. 10002916
  • M 16 x 20 x 1,5 = Best.Nr. 10002909
  • M 18 x 22 x 1,5 = Best.Nr. 10002918

Dimensions: inside diameter x outside diameter x strength

700 Ft (551 Ft + ÁFA)  

GASKET & SEAL KIT

Gasket & Seal Kit For Various Models

Sceed 42 gasket and seal kits:

All Sceed 42 gasket and seal kits fulfil the vehicle manufacturers' high quality standards. They include all the essential gaskets and seals needed to repair the engine (but not necessarily for the entire vehicle).

  • The seals come in protective packaging and are clearly labelled.
  • Made in EU.
  • The illustration is only intended as an example.
2 450 Ft (1 929 Ft + ÁFA)  

MÁGNESES OLAJLEERESZTŐ CSAVAR

A motor működése közben folyamatosan kopik, így aprócska (többnyire mikroszkópukis méretű) fémdarabok válnak le a váltóból, a vezérműtengelyről, a himbákról, stb.

A mágneses olajleeresztő csavar az olajban lebegő fém részecskéket magához vonzza, csökkentve így a blokk kopását.

  • típusspecifikus alkatrész, az eredeti olajleersztő csavar helyére illeszkedik
  • réz alátáttel együtt szállítjuk
1 750 Ft (1 378 Ft + ÁFA)  

MAGNETIC OIL DRAIN PLUG

JMP Megnetic Oil Drain Plug

MAGNETIC OIL DRAIN PLUGS

  • Small price - big impact!
  • Even though they are built using state-of-the-art materials, all engines - and new engines in particular - are subject to wear. Every revolution of the crankshaft and every gear change causes a degree of abrasion, and minute abraded particles of metal can accelerate normal wear in an engine.
  • A magnetic oil drain plug, fitted in place of the original plug, removes these particles from the circulating oil, thus extending the service life for your engine, and ultimately saving you money.
  • Seal included.
  • Please have a look on the integration note which you can find in our documents area.
  • If you are having trouble finding the right drain plug for your vehicle, please use our product listing in the "Bike database" (see right side at the navigation bar)
2 100 Ft (1 654 Ft + ÁFA)  

OIL PAN GASKET

Oil Pan Gasket
BMW 2V-Boxer Models

Siebenrock oil pan gasket:

Gasket in improved OEM quality: Optimally proofed against oil, fuel and leaks. For the Siebenrock oil pan distance ring or as OEM replacement for BMW 2V Boxer-models from 1969 onwards.

  • comes per piece
2 100 Ft (1 654 Ft + ÁFA)  

SAITO BENZINCSAP FELÚJÍTÓ KIT

BENZINCSAP FELÚJÍTÓ KIT

Ha csöpög a benzincsap, a cseréje igen költséges, pedig csak a tömítések öregedtek el. A problémát technikailag tökéletesen, és költséghatékonyan háríthatjuk el a Saito szett segítségével.

  • minden tömítést, illetve idővel elöregedő alkatrészt tartalmaz
  • Made in Japan
  • a képek illusztrációk
3 500 Ft (2 756 Ft + ÁFA)  

SAITO KUPLUNGFEDÉL TÖMÍTÉS

KUPLUNGFEDÉL TÖMÍTÉS

Precíz kialakítás és illeszkedés, első osztályú papír alapanyag.

1 400 Ft (1 102 Ft + ÁFA)  

STAHLBUS ALU-CAP FOR

Stahlbus Alu-Cap for Oil Drain Valve,
Black

stahlbus Racing Cap for Oil Drain Valves

Specially designed for slotted screwdriver and securing wire, as prescribed for motorbike racing.
Simply install in place of the original cap! For even faster oil changing. Note: The securing wire is only required on the race track. The O-ring integrated in the drain valve provides sufficient securing for road use.

  • Material: Aluminium
  • Colour: black anodised
3 500 Ft (2 756 Ft + ÁFA)  

STAHLBUS OIL DRAIN VALVE

Stahlbus Oil Drain Valve

stahlbus Oil Drain Valves

Oil changing can actually be fun! With this system you can drain your oil safely and cleanly, without any spillage or dripping, or even getting your hands dirty.
Simply replace your existing oil drain plug with the stahlbus Oil Drain Valve. To change the oil, unscrew and remove the protection cap and fit the quick-release hose connector. The valve only opens once the connector is locked in place, and the oil can then be drained into a suitable container. When you disconnect the hose connector, the valve closes automatically, and you simply screw the protection cap back on.

The benefits at a glance:

  • No contact with the oil
  • Easy-to-use quick-release connector
  • Drain plug cannot be lost
  • No danger of scalding from hot oil
  • No seal to change
  • Oil sump thread is not damaged
  • Double leakage protection (protection cap and valve)
  • A suction device can be connected
  • A small quantity can be drained for taking a sample or in the event of overfilling
  • O-ring prevents loss of protection cap
  • Oil change without tools
  • No type approval or entry in vehicle documents required!

Includes:

  • Valve and hose connector (CNC precision-machined from high-grade steel)
  • Copper seal
  • High-quality hose approx. 400mm long
  • Protection cap made of anodised aluminium
  • Illustrated instructions for use

Please be sure to check that the thread is the correct size! Sizes for specific vehicles can be also found under "Documents".

HARLEY-DAVIDSON:
For Harley big twin models there is no vehicle-specific model classification possible due to overlapping years of manufacture. Following, common thread sizes are available for Harley Big Twin modelle (not Sportster):

  • Order-No. 10002690, 5/8 - 18 UNF (approx. 17mm): Mainly for older Big Twins from 1938 - 1980 with "horseshoe" oiltanks.
  • Order-No. 10002691, 1/2 - 20 UNF (approx. 13mm): Big Twins from 1981 onward (Shovel, Evo, Twin Cam) with oil drain-SKREW at oil tank or oil pan.
  • Order-No. 10002692, 1/4 - 18 NPT (approx. 14mm): For later Twin Cam models (Dyna, Touring) with oil drain skrew without sealing ring at oil pan. NPT thread means conical, self-sealing thread.

Available thread sizes:
10002846 M12x1.25, thread mounting depth 12 mm (sealing ring: 2 mm)
10002845 M12x1.5, thread mounting depth 12 mm (sealing ring: 2 mm)
10002844 M14x1.25, thread mounting depth 12 mm (sealing ring: 2 mm)
10002843 M14x1.5, thread mounting depth 12 mm (sealing ring: 2 mm)
10002842 M16x1.5, thread mounting depth 12 mm (sealing ring: 2 mm)
10002841 M18x1.5, thread mounting depth 12 mm (sealing ring: 2 mm)
10002693 M20x1.5, thread mounting depth 12 mm (sealing ring: 2 mm)
10002799 M22x1.5, thread mounting depth 12 mm (sealing ring: 2 mm)
10002801 M24x2.0, thread mounting depth 12 mm (sealing ring: 2 mm)
10002690 5/8-18 UNF, thread mounting depth 12 mm (sealing ring: 2 mm)
10002691 1/2-20 UNF, thread mounting depth 12 mm (sealing ring: 2 mm)
10002692 1/4-18 NPT, thread mounting depth 18 mm (no sealing ring)

12 230 Ft (9 630 Ft + ÁFA)  

1 2