Budapest, XIII. Ker. Lehel u. 54. (Kartács u. sarok) Tel.: 06-20 988 13 13

 
Keresés
 
Motorom
Belépés / Regisztráció
Kosár   [0]

1 2 3 4  
Kiegészítő alkatrészek   |   Első lámpák és tartozékaik

ADAPT.LED CORNERING LIGHT

Adaptive LED-Headlight
8691 5 3/4'' JW SPEAKER

An adaptive cornering light like this offers clear advantages over a conventional headlight. When riding your motorcycle at night, it enables you to see further into and beyond each bend in the road. That means you're better prepared for the situation ahead because the light actually shines into the bend. And that means safer riding! Another good thing is that the adaptive LED cornering light can be retrofitted to your motorcycle.

Our version from J.W.Speaker is a 5.75-inch headlight in a bottom-mount housing.

  • Power rating: 22.8 W (low beam), 38.4 W (high beam), 50.4 W (low beam + compl. cornering light), 2.52 W (position light)
  • Temperature range: -40°C to 65°C
  • Brightness: 1020 lm / 1600 lm (low/high beam)
  • Light pattern/lens: low and high beam, corning light, position light
  • Colour temperature: 5000 K
  • Protection class: IP67
  • Approvals: ECE (Reg. 50, 113), FMVSS (108-XX), SAE (J575, J584)
  • Reverse polarity protection: yes
293 650 Ft (231 220 Ft + ÁFA)  

ADAPTIVE LED HEADLIGHT

Adaptive LED-Headlight
8690 5 3/4'' JW SPEAKER

Seeing and being seen can be a matter of life or death for motorcycle riders. Enormous progress has been made in this area thanks to modern LED light technology. The adaptive headlight from JW Speaker takes vehicle lighting to the next level. This LED headlight gives your motorcycle a highly effective cornering light, so you have a better view into bends. And it's easy to fit in place of you normal headlight!

The adaptive headlight from JW Speaker is equipped with special position sensors, which measure your bike's lean angle in corners and switch on additional LEDs to illuminate the inside of the bend. That means better illumination of both left and right curves, in contrast with conventional headlights. ECE-approved.

Details: JW Speaker Model 8690

  • Round headlight
  • Fits in many 5 3/4 inch headlight housings
  • Powerful low beam with 1.020 eff. lm / 8,300 cd
  • High beam with ComfortLite 1,600 eff. lm / 60,000 cd
  • ECE-approved (Reg. 113)
  • Housing made of heavy-duty, corrosion-resistant aluminium

Also available with 7" headlight - see "Compatible products".

Please note that the LED headlight unit becomes hotter than an H4 headlight unit. Adequate ventilation must be ensured. Do not place cables inside the headlight housing.

209 650 Ft (165 079 Ft + ÁFA)  

ADAPTIVE LED HEADLIGHT

Adaptive LED-Headlight
8790 7'' JW Speaker

Seeing and being seen can be a matter of life or death for motorcycle riders. Enormous progress has been made in this area thanks to modern LED light technology. The adaptive headlight from JW Speaker takes vehicle lighting to the next level. This LED headlight gives your motorcycle a highly effective cornering light, so you have a better view into bends. And it's easy to fit in place of you normal headlight!

The adaptive headlight from JW Speaker is equipped with special position sensors, which measure your bike's lean angle in corners and switch on additional LEDs to illuminate the inside of the bend. That means better illumination of both left and right curves, in contrast with conventional headlights. ECE-approved.

Details: JW Speaker Model 8790

  • Round headlight
  • Fits in many 7-inch (PAR56) headlight housings
  • Powerful low beam with 850 eff. lm / 11,500 cd
  • High beam with ComfortLite 1,150 eff. lm / 48,000 cd
  • ECE-approved (Reg. 50, 113)
  • Housing made of heavy-duty, corrosion-resistant aluminium

Also available with 5 3/4" headlight - see "Compatible products".

Please note that the LED headlight unit becomes hotter than an H4 headlight unit. Adequate ventilation must be ensured. Do not place cables inside the headlight housing.

300 650 Ft (236 732 Ft + ÁFA)  

BATES STYLE HEADLIGHT

Highsider LED headlight
Bates Style Type 5, Black

Bates headlights is a name that resonates strongly with riders in the Harley-Davidson, retro and custom bike scene. The authentic retro design is something that simply belongs in this world. Highsider has adopted the Bates Style Type 5 design for this headlight and has incorporated state-of-the-art LED light technology into the 5.75" metal housing.

The round chromed reflector with black trim and clear lens is equipped with a high beam, low beam and parking light function. The low beam lights up in the upper half and when the high beam is switched on, both halves of the headlight light up. The E-approved headlight is very robust and can be installed in no time at all.

Dimensions:

  • Housing diameter: 155 mm
  • Diameter of headlight unit: 145 mm
  • Depth without lens: 110 mm

Bottom mount

  • Available in black and chrome

Connections: (3-pin connector)

  • Red = low beam (+)
  • White = high beam (+)
  • Black = earth (-)
  • Brown = position light (+)
  • Black = earth (-)
104 980 Ft (82 661 Ft + ÁFA)  

CHROME HEADLIGHT

Chrome Headlight High Beam

Mini high-beam additional headlight

Classic additional headlight with visor.

  • Chromed metal housing
  • Clear diffusing lens
  • Type-approved H3 unit with 12 V/55 W
  • Adjustable bottom mount
  • Lens diameter approx. 90 mm
  • Housing dimensions: Diameter approx. 105 mm, depth approx. 75 mm
  • Incl. H3 12V/5W lightbulb
  • E-approved as high-beam headlight
17 500 Ft (13 780 Ft + ÁFA)  

CHROME HEADLIGHT

Chrome Headlight

Mini additional headlight

Available as high-beam light (Order no. 10033817) or fog light (Order no. 10033823). All headlights have a type-approved H3 unit with 12 V / 55 W. Central mounting under the housing.

  • Diameter 120 mm
  • Depth 60 mm
  • Incl. H3 12V/5W lightbulb
  • E-approved
14 000 Ft (11 024 Ft + ÁFA)  
 

Ellipsoid low/high-beam headlight

Ellipsoid low/high-beam headlight
with aluminium mount

The unique design of these ellipsoid headlights enables them to deliver maximum light output from an extremely compact housing. As a set together with the mount, they're ideal for naked bikes and streetfighters, or for a complete conversion.

Ellipsoid headlights:

  • Lens diameter 50 mm
  • Frame diameter approx. 66 mm
  • Length of housing with lens approx. 130 mm
  • Installation depth approx. 75 mm
  • Integrated mount (width 92 mm) with two 5 mm holes
  • H1 12 V/55 W bulb and connection lead included
  • E-approved

Mounting plate:

  • Dimensions (W x H x D): approx. 200 x 118 x 57 mm
  • Incl. M8 screws
  • Aluminium
  • Mounting tabs for quick and easy installation on the lamp mount.
  • Set consists of:
  • 1 Ellipsoid low-beam headlight
  • 1 Ellipsoid high-beam headlight
  • 1 Aluminium mount
33 240 Ft » 28 000 Ft (22 047 Ft + ÁFA)  

Evo Headlight Protector

Evo Headlight Protector
Silv.stainless steel,pair

When it comes to accessories for your adventure touring motorbike, the SW-Motech range offers plenty of choice. Engine guards, side racks, aluminium cases, hand protectors, chain guards, radiator guards, crash bars etc. You name it, SW-Motech has it. You'll even find protectors for the housings of the small EVO fog and auxiliary headlights!

They're made of brushed stainless steel and they protect the high-quality housings from knocks and scratches. At the same time, these protectors add to your bike's cool adventure look.

  • They are secured to the housing itself with 2 screws
  • Material: Brushed stainless steel, corrosion-resistant
  • Weight: 0.074 kg
  • Dimensions: 7 x 8.1 x 7 cm
  • What you get: 1 pair
  • Fittings included

For SW-Motech *EVO* fog lights and auxiliary headlights (10035281/10035282)

13 980 Ft (11 008 Ft + ÁFA)  

FOG LIGHT SWITCH, GREEN

Fog light switch, green
Evo SW-Motech

If you're looking to equip your motorcycle with a "genuine" fog light switch for operating your additional fog lights, then the switch from SW-Motech has to be for you. Not only does it have the instantly recognisable fog light symbol, it also lights up green when you switch on your fog light.

The On/Off switch is splash-proof and compatible with 22 mm to 25.4 mm handlebars. For connecting up, it comes with an insulated cable (30 cm long) and three connectors, for 12 V electrical system.

  • Splashproof
  • Sturdy and compact design
6 980 Ft (5 496 Ft + ÁFA)  

H1 ELLIPSOID HEADLIGHT

Ellipsoid Headlight

Ellipsoid high-beam headlight

Thanks to its unique design, this ellipsoid headlight combines extremely compact housing with maximum light output. As such, this headlight is also ideal for fighters and conversions. The ellipsoid headlight is unobtrusive yet nevertheless offers extremely bright light for maximum vision and safety.

  • ellipsoid diameter 50 mm
  • frame diameter approx. 66 mm
  • length of housing with ellipsoid approx. 130 mm
  • installation depth approx. 75 mm
  • integrated mount (width 92 mm) with two 5 mm mounting holes
  • includes H1 12V/55W bulb and connecting cable
  • E-approval
14 000 Ft (11 024 Ft + ÁFA)  

H1 ELLIPSOID HEADLIGHT

Ellipsoid Headlight H1

Ellipsoid low-beam headlight

Thanks to its unique design, this ellipsoid headlight combines extremely compact housing with maximum light output. As such, this headlight is also ideal for fighters and conversions. The ellipsoid headlight is unobtrusive yet nevertheless offers extremely bright light for maximum vision and safety.

  • ellipsoid diameter 50 mm
  • frame diameter approx. 66 mm
  • housing length with ellipsoid approx. 130 mm
  • installation depth approx. 75 mm
  • integrated mount (width 92 mm) with two 5 mm mounting holes
  • includes. H1 12V/ 55 W bulb and connecting cable
  • E-approval

Due to the illumination which is developed for right-hand traffic, it is not recommended to use this headlight in left-hand traffic.

14 000 Ft (11 024 Ft + ÁFA)  

H4 HEADLIGHT INSERT

Headlight Insert H4

headlight insert H4 diffusing lens:

Type-approved H4 headlamp unit. Diameter approx. 140 mm (5 1/2") or approx. 180 mm (7").
Includes connecting cable and bulbs (H4 12V 60/55W bulb and parking light).

Due to the illumination which is developed for right-hand traffic, it is not recommended to use this headlight in left-hand traffic.

10 500 Ft (8 268 Ft + ÁFA)  

H4 HEADLIGHT UNIT

H4 HEADLIGHT UNIT
CLEAR LENS

H4 headlight unit H4, clear lens:

Type-approved H4 headlight unit. Diameter approx. 146 mm (5 3/4") or approx. 180 mm (7").
Incl. connecting cable and bulbs (H4 12 V 60/55 W bulb and parking light).

Due to the illumination which is developed for right-hand traffic, it is not recommended to use this headlight in left-hand traffic.

10 500 Ft (8 268 Ft + ÁFA)  

HEADLAMP MODIFICATION-KIT

LSL Headlight Modification-Kit

LSL Headlight Conversion-Kit URBAN:

The large, chromed twin headlight of the Triumph Speed Triple and Street Triple models is a visual styling element from the early streetfighter days.
If you're looking to give your bike a distinctive and, above all, dynamic look, you have a choice of two different conversion kits from LSL: The round headlight installation kit for a classic old-school look (see Order no. 60157020 ff.) or the modern, angular/aerodynamic Urban headlight for a futuristic, low-profile front end.
A high-quality, elaborately CNC-machined and anodised light mount is supplied for both versions. The "Urban Headlight Kit" includes the headlight itself and, if required, an instrument mounting bracket is also supplied. For the Speed Triples from 2002 onwards, a milled mounting bracket is always supplied for the instruments. In the case of the Street Triple, a new inlet diaphragm is fitted in the intake tract to replace the air intake located in the light mount of the original headlight.

Note:
#SI: Headlight side mount brackets silver-anodised
#SI: Headlight side mount brackets black-anodised

125 650 Ft (98 937 Ft + ÁFA)  
 

HEADLIGHT

Headlight

British-Style Headlight:

Attractive, conical headlight in the timeless, traditional British style. Ideal for classic bikes, old school custom bikes and cafe racers, or simply to give a modern bike a classic touch.

  • Clear-lens H4 unit with parking light, made of shatterproof acrylic glass
  • Outside diameter of housing approx. 190 mm
  • H4 reflector unit 180 mm (approx. 6 1/2 inches)
  • Depth approx. 155 mm
  • Depth from the side mountings to the end of the headlight body approx. 90 mm
  • Thread of the side mountings: M8
  • Distance between the side mountings approx. 180 mm
  • Includes H4 connector
  • Screws for side mounting and H4 bulb are not included!

Note:
See the additional pictures for how to install the retaining clip for the H4 bulb.

Due to the illumination which is developed for right-hand traffic, it is not recommended to use this headlight in left-hand traffic.

24 480 Ft » 20 980 Ft (16 520 Ft + ÁFA)  

1 2 3 4