Budapest, XIII. Ker. Lehel u. 54. (Kartács u. sarok) Tel.: 06-20 988 13 13

 
Keresés
 
Motorom
Belépés / Regisztráció
Kosár   [0]

1 2 3 ... 34 35 36  
Kiegészítő alkatrészek   |   Világítás, elektromosság

*BULLET* MINI INDEX

Kisméretű, klasszikus formájú, krómozott chopper/cruiser index.

  • magas minőségű, krómozott acél ház
  • ház átmérő: 37 mm
  • mélység: 68 mm
  • lencse átmérő: 27 mm
  • szárhossz: 20 mm
  • rögzítő menet: M10 x 1.25, 25 mm hosszú
  • a testelést a ház adja
  • 2/21 W halogén izzóval
  • E minősített
  • 1db
7 000 Ft (5 512 Ft + ÁFA)  

*LED MICRO 1000* 7.5 OHM

Kellermann Resistor

Kellermann 7.5 Ohm resistor

The resistor for the Kellermann micro 1000 LED turn signal! Simulates a power consumption of 19.2 W.

Sold individually

2 080 Ft (1 638 Ft + ÁFA)  

*MICRO 1000* 10 OHM

Kellermann Resistor

KELLERMANN RESISTOR

For installing KELLERMANN "micro 1000" turn signals.

Sold individually

1 730 Ft (1 362 Ft + ÁFA)  

*MICRO 1000* BALL HEAD

Ball Head Adapter
For Kellermann Micro 1000

BALL HEAD ADAPTOR FOR KELLERMANN "MICRO 1000" TURN SIGNAL

Simply mount the ball head adaptor instead of the standard M8x20 fastening.

  • For mounting the "micro 1000" turn signals on inclined surfaces.
  • CNC-machined.
  • Available in chrome, satin chrome and black.
  • Sold individually
3 480 Ft (2 740 Ft + ÁFA)  

*MICRO 1000* FASTENING

Fastening Thread M8x40
For Kellermann Micro 1000

LONG M8X40 FASTENING THREAD FOR KELLERMANN "MICRO 1000" TURN SIGNAL

Installed in place of the M8x20 fastening thread.

  • CNC-machined
  • Available in chrome, satin chrome and black
  • Sold individually
1 730 Ft (1 362 Ft + ÁFA)  
 

*MICRO 1000* LED TURN SIG

Kellermann LED Turn Signal

Kellermann "micro 1000 white" LED turn signal

  • E-approved as front and rear turn signal
  • The latest LED technology in the design and size of the micro 1000
  • Clear lens!
  • Extremely long life (approx. 50,000 h) thanks to MOSFET-controlled internal Long Life Protection Guard circuit
  • The optimum radiation characteristics of the high-performance lens and the fast reaction of the LEDs make for greater safety!
  • Can be used on any motorcycle!
  • In some cases, resistors or a load-independent relay may be needed to reduce the flashing frequency
  • Available in chrome, satin chrome and black
  • 4 W LED
  • Includes silent rubber fastening M8x20
  • Sold individually
20 980 Ft » 17 480 Ft (13 764 Ft + ÁFA)  

10.0 OHM RESISTOR

Resistor With Cables

Resistor with cables

Simply connect the ready-wired resistor with the crimp connectors, and the flashing frequency will be correct again!

  • 10 ohms (corresponds to approx. 14.4 W)
  • For converting from conventional 21 W turn signals to LED turn signals with, for example, only 6 W
  • Incorrect connection is not possible!
  • Simple, parallel resistor installation
  • Suitable for almost any motorcycle model
2 800 Ft (2 205 Ft + ÁFA)  

12V SOCKET FOR TANKBAGS

12V socket for tankbags with
DIN-angle plug, cable length: 1m

This cable enables you to charge various devices inside your tank bag via a 12 V cigarette lighter socket. The socket is powered via a 1 metre cable with a 12 V flat, angled vehicle plug, which plugs into the small DIN standard vehicle socket on your motorbike. The cable is fed into the tank bag using a cable gland.

Features:

  • 12 V Euro or cigarette lighter socket to provide a power supply inside the tank bag
  • 12 V flat, angled vehicle plug for connecting to your motorbike's small DIN standard vehicle socket
  • Cable length: 1 metre
  • incl. Cable gland for feed-through into the tank bag

Comprises:

  • 12 V cigarette lighter socket with power cable (length: 100 cm) and 12 V flat, angled vehicle plug
  • Cable gland
7 000 Ft (5 512 Ft + ÁFA)  
 

12V SOCKET WITH TERMINALS

12V socket with termianls
and compact plug 2,50 Meter

12V Euro socket with battery terminals and compact plug

For connecting an electrical device (e.g. mobile phone charger, radio etc.) with a 12 V cigarette lighter plug. Also suitable for charging the bike battery. The socket is connected to the battery by means of battery clips. The total length is 2.5 meters.

Components supplied:

  • Cable with 12 V Euro socket
  • Fuse (10 A)
  • Connecting plug with battery clips

IMPORTANT: Not suitable for jump-starting.

4 550 Ft » 2 100 Ft (1 654 Ft + ÁFA)  

33 OHM

Kellermann 33 Ohm Resistor

33 ohm resistor

On motorcycles that have a bulb indicator lamp (some BMW models), it may be necessary to fit both this resistor and a 7.5 ohm resistor (connected in parallel with the tail light and brake light circuits) in order to prevent the indicator lamp from lighting up unecessarily.

2 080 Ft (1 638 Ft + ÁFA)  

5-WAY SWITCH

5-way-switch

Universal 5-way switch, chromed.

3 500 Ft (2 756 Ft + ÁFA)  

7.5 OHM RESISTOR

Resistor with cables

Resistor with cables

Simply connect the ready-wired resistor using the male and female snap connectors, and the flashing frequency will be correct again!

  • 7.5 Ohm (corresponds to approx. 19.2 W)
  • For converting conventional 21 W turn signals to LED turn signals rated at, for example, only 1 W
  • Incorrect connection is not possible!
  • Simpl, parallel connection of the resistor
  • One resistor must be used for each turn signal
  • Suitable for almost any motorcycle model

For all LED turn signals!

2 800 Ft (2 205 Ft + ÁFA)  

8.2 OHM RESISTOR

8.2 OHM RESISTOR
READY TO MOUNT, W. CABLES

Resistor with cables

Simply connect the ready-wired resistor using the male and female snap connectors, and the flashing frequency will be correct again!

  • 8.2 ohms (corresponds to approx. 17.6 W)
  • For converting conventional 21 W turn signals to LED turn signals rated at, for example, only 1 W
  • Incorrect connection is not possible!
  • Simple, parallel connection of the resistor
  • One resistor must be used for each turn signal
  • Suitable for almost any motorcycle model

For all LED turn signals!

2 800 Ft (2 205 Ft + ÁFA)  

ADAPT.LED CORNERING LIGHT

Adaptive LED-Headlight
8691 5 3/4'' JW SPEAKER

An adaptive cornering light like this offers clear advantages over a conventional headlight. When riding your motorcycle at night, it enables you to see further into and beyond each bend in the road. That means you're better prepared for the situation ahead because the light actually shines into the bend. And that means safer riding! Another good thing is that the adaptive LED cornering light can be retrofitted to your motorcycle.

Our version from J.W.Speaker is a 5.75-inch headlight in a bottom-mount housing.

  • Power rating: 22.8 W (low beam), 38.4 W (high beam), 50.4 W (low beam + compl. cornering light), 2.52 W (position light)
  • Temperature range: -40°C to 65°C
  • Brightness: 1020 lm / 1600 lm (low/high beam)
  • Light pattern/lens: low and high beam, corning light, position light
  • Colour temperature: 5000 K
  • Protection class: IP67
  • Approvals: ECE (Reg. 50, 113), FMVSS (108-XX), SAE (J575, J584)
  • Reverse polarity protection: yes
293 650 Ft (231 220 Ft + ÁFA)  

Adapter cable for 2-pole flasher

Adapter cable for 2-pole flasher
20 cm

Adapter cable for easy connection of the LED flasher unit (Order no. 10033844) with the original plug-in position on the motorcycle.

Properties:
- Cable length: 20 cm
- Insulated plug

1 050 Ft (827 Ft + ÁFA)  

1 2 3 ... 34 35 36