Budapest, XIII. Ker. Lehel u. 54. (Kartács u. sarok) Tel.: 06-20 988 13 13

 
Keresés
 
Motorom
Belépés / Regisztráció
Kosár   [0]

  1 2 3 4 5 ... 33 34 35  
Kiegészítő alkatrészek   |   Világítás, elektromosság

BAAS STARTSYSTEM JUMPER

BAAS BS12 - STARTSYSTEM jumper cable
with clamps

Jump start cable with STARTSYSTEM - connector for socket (item-no.10035533) and fully insulated clamps. Jump start in both directions possible but max. for starting bikes up to 1400 ccm.

Features:

  • Flexible cable
  • All insulated clamps
  • Diameter 6 mm2
  • Length: 160cm

Important! Max. engine size 1400 cc! Attempt to start engine for a maximum of 8 seconds. Then wait at least 30 seconds before trying again!

6 300 Ft (4 961 Ft + ÁFA)  

BAAS STARTSYSTEM SOCKET

BAAS BS11 - STARTSYSTEM Socket

The STARTSYSTEM - socket is permanently installed in the vehicle and is the heart of STARTSYSTEM family. The socket allows jump start in both directions and connection of different accessories. The socket is 3-pin but is compatible with the 2-pin connectors.

Features:

  • Splash waterproof with folding cover
  • For jumpstart, max. 90A
  • 6 mm² copper cable
  • Hole diameter 26 mm for mounting
  • Length: 65 cm

Important! Max. engine size 1400 cc! Attempt to start engine for a maximum of 8 seconds. Then wait at least 30 seconds before trying again!

5 250 Ft (4 134 Ft + ÁFA)  

BAAS USB VEHICLE SOCKET

BAAS USB Vehicle Socket
2100 mA, spring-loaded cover

You're miles from anywhere, and there's nowhere to recharge your mobile phone, or any other USB device, when you suddenly notice that the battery is flat! Luckily, you installed the Baas USB Vehicle Socket 2100 mA before you set off on your journey. And better still, if you've got your USB charging cable in your tank bag ...

This socket, with its spring-loaded cover, enables you to charge up your device when you stop for a break or while you're on the road, so you can carry on listening to your music, for example.

  • Max. charging current 2100 mA
  • Compact design with spring-loaded cover
  • Installation with cable ties or alternatively with the ZAH screw-fit mount 10035527)
  • Integrated off-switch to cut off the power to the socket
  • LED indicates readiness for charging
  • Weatherproof housing (IPX3) when cover is closed
  • Complete with cable tie, fuse and mount
8 750 Ft (6 890 Ft + ÁFA)  

BAAS USB Vehicle Socket

BAAS USB Vehicle Socket
2100 mA, spring-loaded cover

You're miles from anywhere, and there's nowhere to recharge your mobile phone, or any other USB device, when you suddenly notice that the battery is flat! Luckily, you installed the Baas USB Vehicle Socket 2100 mA before you set off on your journey. And better still, if you've got your USB charging cable in your tank bag ...

This socket, with its spring-loaded cover, enables you to charge up your device when you stop for a break or while you're on the road, so you can carry on listening to your music, for example.

  • Max. charging current 2100 mA
  • Compact design with spring-loaded cover
  • Installation with cable ties or alternatively with the ZAH screw-fit mount 10035527)
  • Integrated off-switch to cut off the power to the socket
  • LED indicates readiness for charging
  • Weatherproof housing (IPX3) when cover is closed
  • Complete with cable tie, fuse and mount
  • cable length: 150 cm
9 100 Ft (7 165 Ft + ÁFA)  

BAAS USB4 USB-ADAPTER W.

BAAS USB4 USB-Adapter with
angle plug for standard vehicle sockets

For charging USB devices, e.g. mobile phone, camera, sat nav etc. at the same time via a small 12V standard vehicle socket

Features:

  • Input voltage: 12V DC
  • USB output voltage/current: 5V DC/2000mA max.

Comprises:

  • USB Adaptor plug

IMPORTANT: Please take the adapter out of the socket, when you stop riding the bike - otherwise you battery can discharge.

5 250 Ft (4 134 Ft + ÁFA)  

BAAS USB5 USB TWIN SOCKET

BAAS USB5 USB twin socket

For powering up to two external devices via USB port, e.g. GPS sat nav, mobile phone or MP3 player. The housing has IP54 weather protection, and the 1.2 m cable with battery cable lugs permits flexible mounting on handlebar or frame tube. The housing has a groove on each side for optimal securing with cable ties.

Features:

  • Weater protection: IP54
  • Input voltage: 12 V
  • Output voltage/current: 5 V DC / 2.100 mA and 1000 mA max.
  • Length: 120cm

Scope of delivery:
Twin USB power socket with connecting cable and battery cable lugs

8 750 Ft (6 890 Ft + ÁFA)  

Baas USB8 Adapter with

Baas USB8 Adapter with
2 USB-A ports

A great idea from Baas bike parts: the *USB8 Adapter* for vehicle sockets, with two USB-A ports and rubber splash guard. Perfect for motorbikes, quad bikes, cars, trucks and boats with 12 V or 24 V electrical system.
The adapter has a maximum charging power of 3.3 A in total (with USB standard 5 V), which can be divided between the two USB ports.

The rubber splash protection cap seals the plugged-in USB connector. The cap attached to the adapter can be used to seal off the second USB port when it is not in use.

  • 2 USB ports
  • Splashproof
  • Dimensions (L x W x H): 67 x 31 x 34 mm
  • Weight: 37 g
8 030 Ft (6 323 Ft + ÁFA)  

BAAS USH MOUNTING F. BAAS

BAAS ZAH mounting for BAAS USB2
socket

Universal holder for USB2 USB socket. For panel mounting.
Dimensions: 60 x 22 x 30 mm

870 Ft (685 Ft + ÁFA)  

BAAS ZA07 UNIVERSAL

BAAS ZA07 - rotatable universal
angle plug with 8 amp fuse

Universal Plug (rotatable to right angle)

This universal plug (8A) is suitable for DIN sockets (SD14/15 or for ex. BMW, Ducati, Triumph) and cigarett lighter sockets (ZA01-04). ZA07 is rotatable to a right angle plug for using in car or side board sockets. Screwed contact and for solder connection. Rotatable to right angle plug

3 500 Ft (2 756 Ft + ÁFA)  

BAAS ZAH MOUNTING F. BAAS

BAAS ZAH mounting for BAAS cig/euro
sockets

Universal mounting for BAAS ZA - cigarette lighter/euro-sockets ZA01, ZA02, BS 10 (if holder BSH is fixed). Developed for socket mounting without cable ties. Socket with right angle holder is simple to fix in the screw holder ZAH.

Features:
- For tubular handlebars with 22-28 mm diameter
- For retrofitting the BAAS ZA01, ZA02, BS10 (wenn holder BSH is fixed) sockets.

3 500 Ft (2 756 Ft + ÁFA)  

BAR END INDICATOR M-BLAZE

Motogadget M-Blaze CONE
Bar-End Turn Signal

m-Blaze CONE bar-end turn signal

The m-Blaze is the latest generation of turn signal lights. The new TranzLight technology (TLT, patent pending) turns the body of the turn signal into the actual light. TranzLight technology cleverly utilises the total reflection of light waves at the boundary between media with different optical densities so that the light is transmitted directly via the crystal-like glass body of the turn signal. Of course, the casing is made from billet aluminium and elegantly finished with fine laser marking. The transparent glass body gives the m-Blaze a very neutral and discreet look. So it is ideal for many different styles and a very wide range of motorbikes. E-approved as front turn signal.

  • 12 V/ 3 W
  • Diameter approx. 35 mm
  • Overall length: approx. 96 mm
  • Length outside handlebar: 43 mm
  • Length inside handlebar: 53 mm
  • Cable length: approx. 50 cm
  • Weight: approx. 45 g
  • Includes clamp for steel and aluminium handlebars (22 mm and 1 inch) with an internal diameter of 14 mm to 21 mm; connection cable is approx. 50 cm long.

Please always order one left and one right turn signal as a pair!

27 650 Ft (21 772 Ft + ÁFA)  

BATES STYLE HEADLIGHT

Highsider LED headlight
Bates Style Type 5, Black

Bates headlights is a name that resonates strongly with riders in the Harley-Davidson, retro and custom bike scene. The authentic retro design is something that simply belongs in this world. Highsider has adopted the Bates Style Type 5 design for this headlight and has incorporated state-of-the-art LED light technology into the 5.75" metal housing.

The round chromed reflector with black trim and clear lens is equipped with a high beam, low beam and parking light function. The low beam lights up in the upper half and when the high beam is switched on, both halves of the headlight light up. The E-approved headlight is very robust and can be installed in no time at all.

Dimensions:

  • Housing diameter: 155 mm
  • Diameter of headlight unit: 145 mm
  • Depth without lens: 110 mm

Bottom mount

  • Available in black and chrome

Connections: (3-pin connector)

  • Red = low beam (+)
  • White = high beam (+)
  • Black = earth (-)
  • Brown = position light (+)
  • Black = earth (-)
104 980 Ft (82 661 Ft + ÁFA)  

BATTERY SPLITTER SET

Battery splitter set

Allows up to 5 devices to be connected to a single battery using cable lugs. The housing set for positive and negative terminals contains a red and a black connecting cable, and also two housings with screw set. Also included are a fuse holder with fuse for the positive lead and cable ties.

Features:

  • Connecting cables with lugs, each 130 mm
  • 8 mm cable lug is suitable for motorcycle and car batteries
  • Housing dimensions: 55 x 18 x 16 mm
3 500 Ft (2 756 Ft + ÁFA)  

BL 1000 DARK LED TURN SIG

Kellermann BL 1000 Dark
LED Bar-End Turn Signal

BL 1000 Dark bar-end turn signal

The BL 1000 LED is a further development of the successful BL 1000 design, and combines classic elegance with the latest developments in LED technology. Remarkably high light output is thus achieved from a very small unit. The appearance of the BL 1000 LED Dark is also enhanced by an extremely dark-smoked lens.
As usual, the BL 1000 LED comes with all the adaptors necessary to install it on any standard tubular handlebar, and is E-approved as a front turn signal.

  • Extremely long life (approx. 50,000 h) thanks to MOSFET-controlled, internal LONG LIFE PROTECTION GUARD circuit
  • Dark-smoked lens with optimum radiation characteristic
  • With two 4.3 W high-power LEDs
  • E-approved as a front turn signal
  • Incl. all adaptors needed for installation on any standard tubular handlebar
  • It may be necessary to fit either resistors or a load-independent relay to reduce the flashing frequency
  • Sold individually
34 980 Ft (27 543 Ft + ÁFA)  

BL2000 BAR-END TURN

Kellermann BL 2000 Bar-End Turn Signals

BL 2000 Dark bar-end turn signals

A new model in the Kellermann design range, the BL 2000 is a small bar-end turn signal that adds a very elegant feature to your handlebar. Its smoked or clear, ring-shaped lens blends perfectly with the black or chromed metal housing.
Discreet in appearance, this turn signal certainly packs a punch in terms of brightness. This is achieved by incorporating the latest HighPower LED technology from Kellermann. The kit includes the necessary adapters for attaching to all popular handlebars.

  • E-approved as front turn signal
  • Smoked or clear, ring-shaped lensspectacularly bright
  • 12 V/ 4 W
  • Dimensions (Ø x L) approx. 29 x 24 mm
  • Elegant addition to any handlebar
  • Turn signal is virtually invisible when not in use
  • Kellermann HighPower LED technology
  • Long Life Protection Guard, IC controlled, 330kHz
  • High-quality metal housing
  • Suitable for 12V electrical systems

Sold individually!

34 980 Ft (27 543 Ft + ÁFA)  

  1 2 3 4 5 ... 33 34 35