Budapest, XIII. Ker. Lehel u. 54. (Kartács u. sarok) Tel.: 06-20 988 13 13

 
Keresés
 
Motorom
Belépés / Regisztráció
Kosár   [0]

  1 2 3 ... 33 34 35
Kiegészítő alkatrészek   |   Világítás, elektromosság

VEHICLE EURO SOCKET WITH

Vehicle euro socket with hinged cover
cable length: 130cm

Large European-style vehicle power socket with 130 cm cable and self closing higed cover. For charging the starter battery e.g. using the ProCharger charging plug, and for operating 12 V devices such as GPS sat navs, mobile phones, pocket lamps or MP3 players through a cigarette lighter plug.

Features:

  • Universal bracket with cable ties
  • also suitable for installation into the fairing
  • self closing higed cover
  • Cable length: 130 cm

Components supplied:

  • Large Euro vehicle socket with self closing higed cover (splashproof)
  • Universal bracket
  • Connecting cable (length: 130 cm)
  • Fuse holder with Fuse (7,5 A)
  • Two cable ties

IMPORTANT: Not suitable for jump-starting! Mount vertically if possible (not essential)

6 300 Ft (4 961 Ft + ÁFA)  

VÍZHATLAN USB CSATLAKOZÓ ALJZAT

GPS, telefon, MP3 lejátszó, intercom rendszer, stb töltésére ajánljuk.

Tulajdonságok:

  • kormányra szerelhető
  • vízállóság: IP54 szabvány
  • bemenet: 12 V
  • kimenet: 5V, max 1A
  • hossz: 120 cm
6 300 Ft (4 961 Ft + ÁFA)  

VOLTAGE CONVERTER

Voltage converter
6 V to 12 V

Converts 6 V input voltage into a regulated 12 V DC voltage. Suitable for older motorcycles with a 6 V electrical system. Connects up to 4 devices with 12 V operating voltage to a single converter in a motorcycle with a 6 V electrical system.

Specs:

  • Input voltage: 6 V
  • Output voltage: 12 V
  • Max. output current: 0.15 A
  • Functional control: yellow LED
  • Idle current 10 mA
  • with reverse polarity and short-circuit protection
  • Terminals 0.75 mm2 red and black
  • Input 6.3 mm tab connector
  • Output 6.3 mm tab connector
10 500 Ft (8 268 Ft + ÁFA)  

WEDGE BASE BULB 12V 21/5W

Narva Wedge Base Bulb 12V 21/5W

Narva twin-filament wedge base bulb

  • 12 V
  • 21/5 W
  • Base type: W3x16q
1 750 Ft (1 378 Ft + ÁFA)  

WEDGE BASE BULB 12V/1.7W

Wedge Base Bulb 12V/1,7W

Wedge base bulb 12 V/1.7 W

Indicator bulb with glass base.

  • 12 V
  • 1.7 W
  • Base type W2x6.6d
700 Ft (551 Ft + ÁFA)  

WOLO ADAPTERSET CAN BUS

WOLO Adaptersatz Can Bus
for BMW

Wolo Cable Adapter Kit for CAN Bus:

Electrical adapter kit for mounting Wolo horns on BMW motorbikes that are equipped with the CAN bus system. Simply connect the original horn connector to this adapter. There's no need to cut any cables, so you can return the bike to its original state at any time.

How to install:
Fix the red faston connector supplied to the two red/white wires of the adapter. Snap-fit the red female faston terminal onto one of the male fastons on your Valk horn, or onto the relay (depending on the type of horn; check the installation instructions).

7 000 Ft (5 512 Ft + ÁFA)  

WOLO COMPRESSOR HORN

WOLO Air Horn

WOLO Bad Boy Air Horn:

This extra-loud air horn has a maintenance-free compressor with a thick copper core, which means less power consumption. The volume is an amazing 118 dB, measured at a distance of 1 metre. The frequency is 530/680 Hz. The horn is mounted to your motorbike with a bolt, which is, of course, included. The impressive sound is emitted without any delay when you press the button. For simple and expert wiring, we recommend the wiring kit bad boy, Order no. 60900060, see "Compatible Products". These horns are approved for road use, and carry the European approval number E4 000 317.
Important: Once you have installed the horn on your motorbike, it's best to warn people before you demonstrate the sound!

  • Quick and easy to install
  • EC-approved in spite of the extreme loudness
  • Includes relay and fastenings
  • Available in black or chrome
  • For 12 V electrical systems
14 000 Ft (11 024 Ft + ÁFA)  

WOLO COMPRESSOR HORN

WOLO compressor horn

WOLO Bad Boy Air Horn:

This extra-loud air horn has a maintenance-free compressor with a thick copper core, which means less power consumption. The volume is an amazing 118 dB, measured at a distance of 1 metre. The frequency is 530/680 Hz. The horn is mounted to your motorbike with a bolt, which is, of course, included. The impressive sound is emitted without any delay when you press the button. For simple and expert wiring, we recommend the wiring kit bad boy, Order no. 60900060, see "Compatible Products". These horns are approved for road use, and carry the European approval number E4 000 317.
Important: Once you have installed the horn on your motorbike, it's best to warn people before you demonstrate the sound!

  • Quick and easy to install
  • EC-approved in spite of the extreme loudness
  • Includes relay and fastenings
  • Available in black or chrome
  • For 12 V electrical systems
16 450 Ft (12 953 Ft + ÁFA)  

WOLO DISC HORN TWIN SET

WOLO disc horn twin set
high and low tone

WOLO Compact Disc Horn Set High Tone/Low Tone:

An ideal set if you only have limited space on your motorbike. This twin horn set is compact yet very loud. It comprises one high-tone and one low-tone horn, which sound simultaneously. The two horns simply have to be connected together. Mounting brackets and electrical fittings are included. No relay required. The horns can simply be connected to your existing wiring. These horns are approved for road use, and carry the European approval number E9 1089.

  • Quick and easy to install
  • "E"-marked.
  • No relay required
  • Fittings included
  • For 12 V electrical systems
  • Diameter of each horn approx. 90 mm, width approx. 35 mm
  • 105 dB
8 750 Ft (6 890 Ft + ÁFA)  

WOLO HORN TWIN SET

WOLO horn twin set
high and low tone

WOLO Compact Twin Horn Set High Tone/Low Tone:

The ideal solution if you only have limited space on your motorbike. This twin horn set is very compact, but also extremely loud. It comprises one high-tone and one low-tone horn, which sound simultaneously. The impressive sound is emitted without any delay when you operate the button. The two horns simply have to be connected together. Mounting brackets and electrical fittings are included. The combination produces a high-power horn that emits an ear-numbing 115 dB sound (measured at a distance of 1 metre). No relay required. The horns can simply be connected to your existing wiring. These horns are approved for road use, and carry the European approval number E9 6046.

  • Quick and easy to install
  • "E"-marked
  • No relay necessary but recommendable, see "compatible products"
  • Fittings included
  • For 12 V electrical systems
  • Diameter of each horn approx. 85 mm, width approx. 75 mm
  • 115 dB
  • Available in black or chrome

Important: Once you have installed the horn on your motorbike, it's best to warn people before you demonstrate the sound!

14 000 Ft (11 024 Ft + ÁFA)  

WOLO HORN TWIN SET CHROME

WOLO horn twin set, chrom
high and low tone

WOLO Compact Twin Horn Set High Tone/Low Tone:

The ideal solution if you only have limited space on your motorbike. This twin horn set is very compact, but also extremely loud. It comprises one high-tone and one low-tone horn, which sound simultaneously. The impressive sound is emitted without any delay when you operate the button. The two horns simply have to be connected together. Mounting brackets and electrical fittings are included. The combination produces a high-power horn that emits an ear-numbing 115 dB sound (measured at a distance of 1 metre). No relay required. The horns can simply be connected to your existing wiring. These horns are approved for road use, and carry the European approval number E9 6046.

  • Quick and easy to install
  • "E"-marked
  • No relay necessary but recommendable, see "compatible products"
  • Fittings included
  • For 12 V electrical systems
  • Diameter of each horn approx. 85 mm, width approx. 75 mm
  • 115 dB
  • Available in black or chrome

Important: Once you have installed the horn on your motorbike, it's best to warn people before you demonstrate the sound!

14 000 Ft (11 024 Ft + ÁFA)  

WOLO WIRING KIT BAD BOY

WOLO wiring kit bad boy

Wolo Cable Set for Bad Boy Horns:

Fittings for Wolo Bad Boy air horns. The horns, as supplied from the factory, only come with a relay, so this installation kit is extremely useful for wiring them quickly and easily on your motorbike. The pack contains sufficient black cable (2 metres) and red (2 metres) with 2.5 mm2 diameter plus a blade fuse with holder and various other fittings.

4 550 Ft (3 583 Ft + ÁFA)  
 

XENOLEN ECLIPSE LED TURN

Xenelon Eclipse LED Turn Signal
with position light

High-quality LED turn signal in a CNC-machined aluminium housing with smoked lens. The integral yellow, ring-shaped position light adds a stylish feature to your machine. The position light is dimmed while the turn signal is operating, and returns to full brightness when the turn signal is cancelled.

Details:

  • 12 V 0.5/1 W
  • Dimensions: (dia. x D) approx. 34 x 29 mm
  • approx. 26 mm long stem
  • approx. 22 mm long M8 x 1.25 thread
  • Incl. cable, nut and connector
  • Only for front use
  • E-approved
  • Sold individually

  • Resistors or a flasher relay may be necessary to ensure the correct flashing rate. Detailed information can be found under Downloads Instructions/Guides below.
17 500 Ft » 8 750 Ft (6 890 Ft + ÁFA)  
 

XENOLEN PIRANA LED INDEX

Magas minőségű custom index CNC forgácsolt alumínium házzal.

  • 12 V/1,5 W
  • méretek: 43 x 17 x 26 mm
  • szár hossz: 10 mm
  • rögzítő menet: M8, 25 mm hosszú
  • bekábelezve, sarukkal
  • E minősített
  • 1db

Fontos!

Amennyiben izzós indexek helyett szereljük, a megfelelő villanásszám érdekében resistor beszerelése lehet szükséges.

14 000 Ft » 7 000 Ft (5 512 Ft + ÁFA)  

  1 2 3 ... 33 34 35